JLM-106 Lathe Machinery Length 230mm with 6" Supporting Chuck Turning CNC Machining

  JLM-106 Max. swing diameter over bedmm∅400Control system MITSUBISHI M80BMachining Max. swing diameter over camiagemm∅350Tool Center heightmm100capacityMax. turning diametermm∅500turretCutter diametermm∅380 Interference diameter ofadjacent tool machiningmm∅230 Numbers of toolspcs12 Max. machining lengthmm370 Shank diameter of square tool holdermm25 Max. stroke of Z axismm370 Shank diameter of boring tool holdermm40 Max. stroke of X axismm260TailstockDistance between centersmm370 Motor power of Z1 axisKw2.2 Drive Mode-Programmablehydraulic pressure Motor power of X axisKw2.2Appearance Machine tool appearancemm2360*1840*1900 Rapid traverse of X / Z1 / Z2 axism/min25& WeightMachine tool weightKg3800SpindleSpindle nose-A2-5     Spindle diametermm∅170     Bar specification (Standard/Optional)mm∅45     Supporting chuckinch6"     Motor power (continuous / 30min)Kw5.5/7.5     Max. speedrpm6000     spindle motor torque (rate/max)Nm35/47.7     spindle motor current (continous/30min)A32/48     C-axis resolution1/n1024/32768    JLM Series CharacteristicsJLM-106 / JLM-106M JLM-508 / JLM-508MJLM-1012 / JLM-1012MJLM-1 series adopts the compact design concept, especially for machining shorter parts, to provide customers with a turning and milling composite center with high cost-effectiveness.JLM-5 series is specially designed for machining ultra-long part. The effective machining length in Z axis is 500mm, and the outer diameter taper of machined product at the maximum stroke is less than 0.008mm, which is much excellent than the industry standard and national standard.  JLM-10 series machine is designed to have a slant bed and a saddle with large span, achieving better rigidity and stable cutting performance.with a large swing over bed and an effective machining length of more than 1,000 mm, both long-axial and disc parts can be machined by this series machine. The machine is equipped with standard MT5 servo tailstock, with high precision and fast speed. It is also optionally provided with a variety of optional accessories, such as steady center rest and servo follow rest, which can provide more machining solutions for customers. JLM series is the type of general-purpose machine, which equipped with high-rigidity bed and roller linear guide rail, combined with the advantages of heavy cutting and fast travel, and fixed with standard hydraulic tailstock under programmable control, so it can meet the machining demand of customers to the greatest extent. With Its powerful cutting performance and extreme machining accuracy, the JLM series CNC lathe and CNC milling and turning machine of Jhenjet Intelligent combines the advantages of high spindle motor power, high-rigidity bed and turret to provide customer with efficient machining capability.   Base Integrally formed rigid structure Add specific trace elements to improve stability 30-degree inclined bed Easy for chips removal, close-distance operation, and handling Servo Turret SeriesCompact design, small size, high stability, and simple structure.Servo motor drive design for fast two-way tool selection.Extremely strong hydraulic locking force provided by three-piece clutch locking device.   CNC systemThe Mitsubishi system is the best choice to provide you with stable multi-axis combined machining, and it can optimize your product process while ensuring better product consistency, improving your machining effciency.  Meanwhile, its after-sales service is as timely and efficient as expected by Jhenjet Intelligent.  Hydraulic SystemKorea or Japanese hydraulic system is adopted to improve equipment stability.    SpindleThe spindle is supported by front three and rear two roller bearings to improve the rigidity of the spindle and reduce the runout of the spindle. The spindle has a strong hydraulic clamping force to facilitate the replacement of collets and chucks.  Screw rod and guide railThe screw pitch in X and Z directions is perfectly matched to create a more perfect appearance effect and an excellent rapid feeding.    Internal                                                                                                                 WorkpieceJhenjet Company Profile -Brand "JSMART"Jhenjet Intelligent has a history of 30 years since its establishment in Taiwan. It has focused on the machining and the manufacturing of key parts and components of machine tools. It also serves as an agent for many Japanese enterprises.Since it was put into operation in Guangdong Province in 2014, Jhenjet Intelligent has been committed to become amanufacturer and supplier of specialized turning & milling composite center.In 2018, it passed the national high-tech enterprise certification and had more than 10 machine tool patents. At present, its eight products have passed the high-tech product certification in Guangdong.Jhenjet Intelligent has established a complete production and manufacturing system, and implemented the procurement, assembly and inspection processes in a strict manner. Welcom