G4 Jf0920 Automatic High Speed Flexo Printing Slotting Die Cutting Machine Carton Machinery

G4 Automatic High-Speed Flexo Printing Slotting Die-Cutting MachineMAIN MACHINE CHARACTERISTICSMACHINE CHARACTERISTICS:1. Four shaft lead edge vacuum transfer feeding system,the pressure of suction is adopted frequency control,which can apply for difference size and bending of cardboard.2. The main drive system is adopted US EMERSON servo control.It can make more accuracy and improve the service life of the machine 3. It is using precise screw with linear guide , which is prevent  the cutting holder locked with cutting shaft and make it more accuracy.4. With No-key connection ring.There will be no clearance after long time using., so that it has high precision for positioning and exact overprint.5. The transmission gear is made of high quality alloy steel, which is processed by tungsten carbide and treated by heat treatment and Rockwell hardness of 58-62 degrees.6. With doctor blade interchange rubber roller structure;Change the mechanical configuration more flexible.7. Paper feeding wheel adopts rack type with quick adjusting structure without wrench.ELECTRICAL CONTROL SYSTEM FEATURES:1. The Electrical components are used internationally famous brands.Mainly control is adopted US servo numerical control positioning technology. Feeding unit, printing unit, slotting unit, die cutting unit are equipped with colorful PLC touch screen, with one-touch machining setting with zero function can be connected to ERP system.2. The machine with order memory,easy to change the order3.With ink shortage alarm to avoid the wastage.4.In particular with computer remote maintenance; easier to resolve equipment failure, more efficiency and reduce the cost maintenance.MACHINE PARAMETERS ModelJF0618JF0920JF0924JF1224JF1228JF1424JF1428JF2436Max. Speed (pcs/min)350300260250200200180130Max. Feeding Size (mm)600*1900880*2050880*24501180*24501180*28501380*24501380*28502400*3500Min. Feeding Size (mm)180*450300*600300*600370*700370*700400*700400*700450*850Skip Feeding Size (mm)700*19001100*20501100*24501500*24501500*28501700*24501700*28502500*3500Max. Printing Size (mm)550*1800850*2000850*24001150*24001150*28001350*24001350*28002300*3300Min. Slotting Gap (reverse knife) (mm)150*75*150*75240*80*240*880260*90*260*90300*110*300*110Printing Plate Thickness (mm)7.2Board Thickness (mm)1.5-121.5-15MACHINE PARTS CHARACTERISTICS:FEEDING UNIT1. CONTROL OF MACHINE STATIONS: 1) Electrical control machine station clutch with alarm-bell indicates by continuous ringing in its movement.2)The main motor adopts control of inverter, and it is set the startup protection function. (It cannot be started up until the station is locked tightly).3)There are safety control switches in each machine station; to ensure the safe operation, press the safety button when the person is inside the machine which to avoid someone moving the machine from outside.4) Air-Cylinder interlock device.2. LEAD EDGE FEEDING SYSTEM:1)Lead edge paper feeding system equipped with America Emerson, it adopts the four shaft rows feed system.2)Wind turbine adopts transducer control, automated wind control.3)The rear paper-holding frame adopts electric control for its front-back and height position.4)The adjustment of left/right side baffles adopts electric control with digital display.5)The clearance of the front plate is manual control with digital display.6)A camera and a counter that automatically count the production quantities and they can set the quantity of cardboard required, when it reaches the preset amount of cardboards, set the machine will automatically stop feeding.3. FIRST PULL ROLL1)The cardboard feeding rubber rolls are made of solid steel covered by wear-resistant rubber. The outer diameter is 158mm. An auto cylinder buffer is adopted to absolutely prevent the cardboard's strength being damaged due to too small feeding clearance.2)The clearance of cardboard feeding rolls is electric adjustment and can be displayed on the screen. The adjustment range is 0-11.5mm.3)The outer diameter of the lower cardboard feeding roll is 160mm, and the feeding roll adopts gear structure on the surface, it can decrease the feeding pressure greatly thereby ensure the feeding accuracy, reduce the cardboard damage and it carries out dynamic balance correction.4. SECOND PULL ROLL1)Solid shaft with 3 pcs pull rolls and screw locking system.2)The lower roll outer diameter 160mm that provide balance correction, and its surface polished and hard chrome plated. 3)The clearance of cardboard feeding rolls is electric adjustment and can be displayed on the screen. The adjustment range is 0-10.5mm.5. RESET MACHINE:1)Paper-feeding section, printing section and slotting section return zero position after the combination of machine.2)Machine resetting can reduce time of test printing, save resource and decrease waste.6. DUST-REMOVAL DEVICE1)Dust-absorbing vacuum channel adopts subsection control; the air amount can be adjusted according to the size of printing paperboard.2)The intake of dust-absorbing vac