Lgs-1300 Wholesale High Speed Digital Slitting Fabric Slitting Cutting Pet PVC PP Roll Paper Slitting Rewinding Machine

Product Description Straight knife, standard with 8pcs  The winding adopts A and B air expansion shaft structure, which is convenient for loading and unloading;  optional : round knife,suitable for paper ,fabric material  optional :slip shaft ,suitable for uneven material ,film etc.   tension control part.  shaftless unwind  touch screen, shaftless for unwindEPC device Product ParametersUse:The machine is suitable for slitting BOPP, pet, CPP, CPE, PVC and other rolled materials. In the production process, the materials are cut and rewound according to different needs.Performance and characteristics:1. The machine adopts DC motor to maintain smooth operation during acceleration; (variable frequency speed regulation can also be adopted)2. Automatic meter counting, alarm and other functions;3. The winding adopts a inflatable shaft structure, which is convenient for loading and unloading;4. The unwinding adopts photoelectric automatic deviation correction system, so that the irregular materials can be cut normally5. Automatic discharge device for waste edge of flat knife longitudinal cutting6. Hydraulic shaftless feeding, 3 inches. Technical parameters1. Width: 1300 type2. Slitting thickness: 20g-300g / m2 (depending on different raw materials)3. Maximum diameter of raw material unwinding: φ 700mm4. Maximum diameter of raw material winding: φ 450mm5. Maximum width of raw material for slitting: 1300mm6. Double ball slip shaft of winding machine: φ 75mmx30mm7. Number of reeling shafts at the same time: 2 (double shaft reeling)8. Deviation correction accuracy: ± 0.5mm9. Slitting accuracy: ± 0.5mm10. Speed: 10-300m / min11. Total power: 7KW12. Body color: white cover white (other colors are optional)13. Adopt automatic photoelectric deviation correction (depending on different raw materials and customer specific requirements) Machine configuration1. Unwinding part:(1) The frame adopts steel plate structure(2) Magnetic particle tension control: tension control range: 5-100n M(3) One set of Ningxia 10kg brake is used for tension magnetic powder4) The feeing shaft adoptsd the form of feeding without shaft, 1(5) The transmission guide roller adopts aluminum guide rod and is subject to dynamic balance treatment(6) The base material can be adjusted left, right and parallel: manual operation(7) 1 set of photoelectric deviation correction system  Traction device:(1) Structure type: active traction pneumatic compression type(2) The pressing mode is controlled by air cylinder(3) Compression cylinder specification: φ 50 * 25 2 pcs(4) The pressing roller adopts rubber roller (specification: φ one hundred and ten × 1400mm) 1(5) The driving roller adopts rubber roller (specification: φ one hundred and twenty × 1400mm) 1(6) Driving mode: the main motor drives the main transmission shaft, and the main shaft drives the driving roller for tractionWinding device(1) Structure: inflatable shaft (single shaft winding is also available)(2) Adopt tile type inflatable shaft (specification: φ seventy-four × 1400mm) 2(3) Ningxia magnetic powder clutch 5kg 2 pcs(4) Compression mode: cylinde top sleeve structure and two back pressure shaft devices are adoptedwaste discharge device:(1) Discharging method: blowing waste(2) The main motor adopts one three-phase asynchronous motor (specification: 0.75KW)Control part: 1 piece(1) The control system of the machine can be roughly divided into three parts: host control, tension control and other control.(2) Host control: (Siemens PLC + HMI)(3) Tension control: the unwinding tension, winding tension and control speed range are wide. It has excellent performance at low speed and high speed, and the winding effect is excellent.(4) Attached with electronic meter counter; Alarm shutdown; Automatic length determination.(5) The cutting length can be preset for shutdownSupporting facilities: (the user is responsible for it(1) Power supply: three-phase three wire air switch: voltage 380V 50Hz(2) 1.5KW air compressor   Main Parameter:Model8001100130016001800Width of unwind≤800MM≤1100MM≤1300MM≤1600MM≤1800MMMax.diameter≤1000MM≤1000MM≤1000MM≤1000MM≤1000MMDiameter of rewind≤650MM≤650MM≤650MM≤650MM≤650MMpaper core size76MM76MM76MM76MM76MMSpeed0-300mmin0-300mmin0-300mmin0-300mmin0-300mminMotor power5.5KW5.5KW5.5KW7.5KW7.5KWCutting width0.5-800MM10-1000MM20-1300MM25-1600MM30-1800MMPackaging & Shipping Company Profile Certifications   FAQ Q: Are you manufacturer or trading company?A:We are the manufacturer and have our own workers and factories.Q:How long is the warranty period?A: All of our products have 2 year warranty and whole life maintanceQ: What's the main market of your company?A: We have customers all over the worldQ: What's your delivery time and payment Terms?A: Normally,it need about 10-30 days.The exact time depends on your quantity.The payment terms always 30% deposits,70% to be paid before shipment.Q: What package do you use for the product?A:Be Coated with anti-corrosion oil, and covered with plasti