Good Quality 50t Truck Crane Qy50K

1.Product IntroductionXC/MG QY50KA truck crane's structure is compact, the industry operating performance is the highest. Lifting performance and driving performance of a comprehensive upgrade, leading competitors.1. Five section U-type booms. The boom length is 11.4m-43.5m with strong lifting performance, leading 5%-10% ahead of products with the same tonnages in the same industry.High-power engine with good dynamic performance, strong gradeability and superior trafficability. The maximum gradeability and maximum travel speed respectively are 42% and 85km/h.2. Waterproof connector clip is equipped with rubber sheath inside with excellent water impervious and level of protection reaches to IP65. The air-conditioning condenser is separately installed, the heat-sinking capability is sharply improved and the environment temperature reached to more than 45ºC.3. The boost system will work only by stepping on the clutch that effectively avoids gearbox damaging gears when shifting. Compared with the same industry, 100mm distance of shift gears and 45% of shifting force are respectively reduced.                                                                                                                                          2.Product ParametersDescription   UnitParameter value Overall length / mm 13930 Overall width / mm 2780 Overall Height / mm 3630 Axle base 1st ,2nd axle mm 1470   2nd ,3rd axle   4300   3rd ,4th axle   1350 Wheel Base / mm 2304+2075 Front overhang/rear overhang / mm 2389/2064or 2376/2064 Front extension/rear extension / mm 2131/226 or 2144/226 Total vehicle mass in travel configuration / kg 42200 Axle load Front axle kg 16200   Rear axle   26000 Engine rated power / kw/(r/min) 276/2200 Engine rated torque / N.m/(r/min) 1500/1300-1600 Max. travel speed / km/h 85 Min. steady travel speed / km/h 2~3 Min. turning diameter / m 24 Min. ground clearance / mm 327 Max. grade ability / % 42 Approach angle / ° 19 Departure angle / ° 15 Braking distance (at 30 km/h, full load ) / m ≤10 Oil consumption per 100km / L 40 Exterior noise level during acceleration traveling / dB (A) ≤88 Noise level at seated position / dB (A) ≤90 Max. total rated lifting capacity / t 50 Min. rated working radius / m 3 Turning radius at turntable tail / mm 3800 Max. load moment Base boom KN.m 2009   Fully-extended boom   1129 Outrigger span Longitudinal m 6.1   Lateral   7.1 Hoist height Base boom   11.9   Fully-extended boom   44   Fully-extended boom + Jib   58.1 Boom length Base boom   11.4   Fully-extended boom   43.5   Fully-extended boom + Jib   59.5 Jib offset angle / ° 0, 15, 30 Time for boom raising / s ≤40 Time for boom extending fully / s ≤90 Max. slewing speed / r/min ≥2.0 Exterior noise level / dB (A) ≤118 Noise level at seated position / dB (A) ≤90                                                                                                                                           3.Product Pictures                                                                                                                                          4.Recommend to you25Ton Truck Crane QY25K:Size parameter: 13110*2550*3490mm Maximum rated working weight: 25Ton Engine: SC9DF290Q6/MC07H.29-60 QY25 is widely used for the lifting operations in general engineering projects, such as construction sites, transportation, ports, bridges, deserts, oilfields and mines, etc. Lifting capacity, efficiency, controllability, mobility and environment adaptation take the lead in the industry.4-section boom of 34 m with U-type profile is adopted; the max. lifting load is 25 t; the max. working radius is 30 m; the performance takes the lead comprehensively. the max. lifting height is 43.2m;The entire machine is designed to endure high temperature, it is allowed to work in ambient temperature up to 60ºC. With dust-proof parts equipped, the crane is applicable to applications in deserts.  100Ton Truck Crane QY100:Size parameter: 16030*3000*3970mm Maximum rated working weight: 100Ton Engine:  WP10.5H430E62  1.The innovative jib system adopts embedded block, plug-in boom head and international advanced U section jib, which has excellent lifting performance and safe and reliable lifting work.  2.The unique stretch and retract technique avoids the bend of the core pipe and cylinder and the break of the boom caused by misoperation, improving the safety of the operations.  3. Eight patent techniques ensure the smooth, high efficiency and energy conservation of the lifting, rotation, and luffing systems.                                                                                                                                              5.Contact meName: Symphony fan