Full Hydraulic Crawler Drilling Machine for High-Speed Auger Drilling in Soft and Outburst-Prone Coal Seam

[Application scope and technical characteristics]ZDY3000LG Drill Rigs are suitable for high-speed auger drilling in soft and outburst-prone coal seam. It can effectively improve the drilling cutting removal ability. With high rated torque and rotary speed, the drills can significantly improve drilling depth in soft coal seam and other cracked formation, which can effectively solve the drilling difficult problem of in soft coal seam.[Techinical features]1.Multi degree of freedom luffing mechanism, convenient for angle adjustment and stability The azimuth angle adjustment is ± 90°, the primary angle adjustment range is -60° ~ ±90 ° (after turning the machine body, it can reach -90°~±90°), and the height adjustment range is 1100mm. The angle adjustment and stabilization process does not need to screw down the bolts, but only needs to operate the handle of the hydraulic valve. 2.Borehole can be drilled by ZDY3000LG without pulling down the belt. 3.The width and size of the drilling rig is small (1250mm), which is convenient for moving the hole (or drilling before construction);The feed device can slide back and forth, and the position of the machine body can be adjusted flexibly during the side wall construction of the belt lane to reduce the actual occupation of the tunnel space by the drilling machine. 4.It is stable and reliable during drilling construction, which is conducive to the treatment of accidents in the hole. 5.The drilling rig is equipped with high-speed power head and automatic variable motor, which can adjust the spindle speed through the spindle speed control valve block, which is convenient, fast, time-saving and labor-saving. 6.The gripper is a long closed structure with butterfly spring clamping and oil pressure loosening, with large clamping force and opening amount, which can prevent sparks caused by friction with drill pipe during high-speed drilling.                                       Gripper                                             Centralizer7.The drilling rig has the protection function of overpressure fallback. When the rotary pressure exceeds the limit, the drill pipe only rotates in the hole and does not feed, so as to reduce the occurrence of sticking during drilling. 8.Easy to turn the fuselage. To adjust the inclination angle of the drilling machine to 0°, it is only necessary to screw out 14 screws, push the feed device to turn 180°, and then tighten the screws. 9. Load-sensitive control system to reduce energy consumption and achieve lower cost. 10. High quality hydraulic components(Rexroth and Sauer) maintain system reliability. 11. Stable  hydraulic system is achieved by the application of cartridge valves. 12. The feed stroke is 1800mm, which can meet the requirements of adding and unloading 1.5m plug-in screw drill pipe in the middle. [Technical specification]TypeZDY3000L(G)Rated torque/N·m3000~400Rotary speed/(r/min)160~800Borehole depth/m300Rod diameter/mm100/60.3Dip of the main axis/°-90~+90Azimuth adjustment/°-90~+90Horizontal drill height/m1.62~2.72Max feed/pull force/kN140/190Feed/pull stroke/mm1800Motor power/kW90Max travelling speed/(km/h)2.0Max gradeability/°15Weight/kg7900Dimension(L×W×H)/m4.82×1.25×1.88  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1