Duplex Press, Twin Press, Duplex Vulcanizing Press

duplex press, twin press, duplex vulcanizing press XLB-D600X600X1/2.5MN General Introduction of this duplex vulcanizing press: The machine applies to sulfurizing various kinds of rubber and plastic model products as well as non-model products. This press is designed with duplex pillar structure which can be operated and used alone or be used and operated together. When using this set of duplex press, 2 single presses won't influence each other. This plate vulcanizing machine is used in suppressing various kinds of rubber products, thermosetting plastic products and can also be used as common hydraulic press. The press has simple structure, flexible operation, capacious space and beautiful appearance etc. This press mainly consists of host machines, hydraulic system, and electronic control system. Fuel tank is installed on the side of host machines, won't be affected by the temperature of host machine plates. Workers can operate conveniently with capacious visual. Plate temperature is controlled by temperature control table, with high precision and good quality of products. All the parts are all according to ministry of chemical industry standard, using quality materials, with meticulously processed. Working Process: Under the working hydraulic pressure, the embolism ascends to make hot plate close for getting pressure, while the embolism descends(namely hot plate turning on) by deadweight of hot plate, platform and embolism to drive working fluid to fuel reserve tank to achieve the aim of descending (namely turning on). Made of nodular cast iron, the oil cylinder of machine is improved in compressive strength and wear resistance. Seal ring made of oil-proof rubber is placed in oil cylinder to have sealing effect in working process of this machine. Combined oil pump, power source of the machine, provides working fluid with certain pressure. Working fluid enters into oil cylinder by control valve to make control handle on control valve turn to different places, and then embolism is able to ascend or descend. Adopting tubular electric-heating component to heat up, the machine can reduce air pollution to keep workshop clean without boiler. The machine is beautiful in shape, rational in structure, convenient in control, safe as well. ModelXLB-600X600X1/2.50MNTotal Pressure (MN)2.5Hot Plate Specification (mm)600X600Daylight (mm)300Working Layer No.1Working Hydraulic Pressure (Mpa)20Mould Closing Speed(mm/s)12PistonStroke (mm)300Piston Diameter(mm)400Heating ModeElectric/Steam/OilHeating Temperature140-180degree CelsiusMotor Power (KW)15Control ModeAutomatic PLC ControlPress StructurePillar Type  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1