Manufacturer Supply Decanter Centrifugal Machine for Oilfield Service

  Product Description Xi'an HONDIN Energy Science and Technology Co., Ltd (abbreviation: HONDIN Energy HONDIN) produces spinning discharge sedimentation centrifuge drilling fluid centrifuge) is used for the separation of suspensions containing solid-phase particles of particle size d22um, solid-phase concentration of 2.70%, the liquid-phase viscosity of US0.01Pa5 and the clarification of liquids containing a small amount of solid-phase separation, but also for the separation of the amorphous materials that are difficult to the regeneration of the filter cloth and the concentration of the solid-phase. It is also suitable for separating amorphous materials that are difficult to regenerate the filter cloth and suspensions with a wide range of solid-phase concentration, and it is used in petroleum, chemical, food, pharmaceutical, environmental protection and other fields that require solid-liquid separation.The Hondin LW series horizontal spiral discharge sedimentation centrifuge drilling wave centrifuge produced by Hongding Energy is a special equipment for solid-liquid separation designed for the characteristics of oil drilling fluid, which can complete the processes of feeding, centrifugal settling and discharging at full speed, and is mainly used for recovering heavy kunzite, removing fine solids, lowering the solid content of the drilling fluid, controlling the density and viscosity of the drilling fluid, and guaranteeing the performance of the drilling fluid, as well as playing an important role in the rapid drilling. It plays an important role in rapid drilling.Working Principle: LW Series Horizontal Screw UnloaderLW Series Horizontal Screw Discharge Sedimentation Centrifuge (Drilling Wave Centrifuge) is driven by two motors, the main motor drives the rotating drum and the differential shell through the belt, and the auxiliary motor drives the screw propeller after the differential speed change. This makes the drum and the spiral propeller rotate in the same direction, and has a certain differential rotation speedWhen the material enters the inner barrel of the spiral propeller with the feed pipe, due to the high speed rotation, the material flows to the drum wall through the outlet, and the light and heavy phases of the material are composed of the light and heavy phases, due to different centrifugal forces, the heavy phase is quickly deposited on the inner wall of the drum, while the light phase is slowly adhered to the surface of the heavy phase, and a layer of interfaces between the light and heavy phases is formed. With the increase of heavy phase deposition, the top of the spiral blade into the heavy phase deposition layer, when the drum and the spiral propeller are rotating at high speed in the same direction, and there is a certain difference, this relative difference in rotational speed so that the heavy-phase particles to the small end of the outlet, while the light-phase liquid through the spiral to form a channel that flows to the liquid phase outlet, the position of the liquid-phase overflow port by the regulator plate control.Detailed Photos Product Parameters ModelLW450×1000NLWG355×1250NLWG-VFD355×1250NBowl Diameter450mm355mm355mmBowl Length1000mm1250mm1250mmRotary Speed1800r/min3300r/min0~3300r/mim(VFD)G-Force81520352035(max)Separation Point5~7μm2~5μm2~5μmMain Drive30Kw-4p30Kw-4p37Kw-4pBack Drive7.5Kw-4p7.5Kw-4p7.5Kw-4pMax Capacity≤60m³/h≤40m³/h≤40m³/hWeight2700kg2950kg3000kgDimension2600*1860*1750mm2900*1850*1750mm2900*1950*1750mm/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1