Hot Products with Great Quality and Practical Fully Automatic Face Mask Making Machine

Hot products with great quality and practical fully automatic face mask making machine Technical parameters:Full automatic one blank mask machine+2ear loop welding machineMask typeDisposable face mask with earbandDesign production capacity100-130 PCS/minApplicable materialspp non-woven composite fiberNumber of applicable layers3/4 layerProcessing methodsUltrasonic weldingControl methodTouch screen automatic controlAir pressure0.5-0.7MPa(Flow:300L/min)Power14KWOperating VoltageAC220v/50HzFloor Space6500mmx3500mmx1500mmIntroduce :1,The top layer, filter layer, and bottom layer of three rolls of fabric are automatically aligned and fed, and bilateral symmetrical ultrasonic continuous blanking is performed. After continuous roller blanking, it is divided into two stations for ear band welding to improve production efficiency. After welding the ear bands, Automatic counting stacking.2,The production uses a two-pronged structure. The main body of a mask is automatically conveyed and shunted to the two sets of ear bands by an automatic conveying system.3,It can realize automatic feeding cutting and ultrasonic welding of nose clips.4,High-speed production, 160,000 masks per day (24h).5,Production of a variety of different products, replacement of abrasive tools can produce products of different shapes and specifications.The device is integrated by 3 machines: 1 mask body machine and 2 ear band machines.Mask size: 175mm × 95mm (adult model), the finished product has a beautiful appearance, high quality, and high cost performance, which meets the production quality requirements of disposable civilian masksFunction introduction of body machine This machine adopts advanced high and new technology, and is jointly developed by professional engineers. It is a mask equipment with current production speed, high stability and complete configuration.The production raw materials need only be installed on the feeding rack. After the modulation is OK, the machine will automatically produce. Only one person needs to operate the packaging, which fully realizes the entire automated production. The length of the nose bridge is adjustable, and the product size error is plus or minus 2MM.This machine can produce 1 ~ 3 layers of non-woven masks. We can design according to your needs. Our products are beautiful in appearance, stable in performance, low in failure rate, small in size, small in area, and adopt aluminum alloy structure, which is beautiful and sturdy without rust.Production ProcessManually hanging raw materials-> Automatic feeding-> Folding view-> Nose bridge cutting / feeding-> Hemming welding-> Forming welding-> Automatic slicing-> Finished product output-> Stacking receiving-> Automatic packaging machine Cargo manual packaging conveyor line.Product Features 1. It adopts aluminum alloy structure, which is beautiful and solid without rust.2. Computer PLC programming control, high stability, low failure rate and low noise.3. Imported servo motor and stepper motor drive, high precision.4, photoelectric detection of raw materials to avoid errors and reduce waste.5. This device can supply 1 or 2 inner ear straps or outer ear straps.6. The machine adopts heavy-duty casters and buffer foot cups to move and fix, which is convenient and quick to move, does not shake and does not hurt the floor.7, this model is equipped with a new advanced conveyor belt, automatically collect products, high accuracy, just need to sort and pack.8. Equipment can be modified according to product requirements, product size, length and thickness.9. According to different production orders, different ear loop machines and the number of mask layers can be configured, which are economical and practical, and completely solve the customer's capital cost + floor space + staffing and other major problems, which truly brings rich customers economic profit.Ear loop machine function introductionThe device uses ultrasonic welding to fuse an elastic band to the inside of both ends of the mask body. This is the last processing step in the production of inner earmuffs. Only one operator needs to place the mask body on the mask board piece by piece. The device completes automatically. This machine adopts servo and step drive, with precise transmission and adjustable speed. The welding output of a single ear loop is ≥45 pcs / min, and the output of one drag two is usually ≥90 pcs / min.feature1. Small footprint, aluminum alloy structure, beautiful and firm, no rust.2. Computer PLC control, servo / step drive, high degree of automation, high stability and low failure rate;3, photoelectric detection of raw materials to avoid errors and reduce waste.4, photoelectric detection, automatic counting function (including total counting and batch counting)Production Process of ultrasonic earmuff machine Feeding the main body of the cover → automatic feeding of ear loops → welding ultrasonic ear loop → output of finished products → counting → stacking of finished products → conve