Jingdong Paper Flute Laminator Laminating PVC Film Vacuum Membrane Pressing BOPP Non Woven Fabric Coating Machine Cardboard Automatic Lamination Machine

Jingdong Paper Flute Laminator Laminating PVC Film Vacuum Membrane Pressing bopp Non woven fabric coating machine Cardboard Automatic Lamination Machine  Product DescriptionThe JD-LM105-1500 plastic extrusion film laminating unit uses polyethylene or polypropylene as raw materials. After being melted and extruded, it is combined with various packaging (decorative) materials such as plastic woven fabric, cylindrical fabric, cloth, paper, and other substrates for single-sided or double-sided lamination, as well as lamination with multiple substrates. This process improves the tensile strength, air tightness, and moisture resistance of the packaging materials. It is widely used in the packaging, storage, and transportation of products in industries such as fertilizers, cement, metallurgy, and minerals.The entire process of this unit, from substrate feeding to lamination and winding, is equipped with an advanced control system. The control system uses synchronizers and frequency converters, allowing independent or synchronized speed control of the extruder and laminator. The transverse extruder adopts automatic temperature control, pneumatic feeding, frequency conversion speed regulation, and quick screen changer. It also uses an adjustable die head for uniform film output and convenient adjustment. The automatic deviation correction device guides and corrects the substrate, while the tension control adopts magnetic powder control, providing convenient adjustment and stable and reliable tension. Before lamination, the substrate is preheated and dried using a preheating roller. The large cooling roller for film lamination adopts a double-layer water cooling structure, ensuring good cooling effect and firm lamination. It is equipped with adjustable edge trimming and edge blowing devices, ensuring smooth and reliable winding. The unit is also equipped with a product length counter and semi-automatic roll changing device. The engagement of each roller is controlled pneumatically. Product ParametersLaminating Width900-1500(mm) Laminating Thickness0.0015-0.08(mm) Laminating Line Speed20-150m/minscrew diameterΦ90 L/D33:1screw speed100r/minMaximum extrusion volume150-220kg/h Roller Effecive Length1600(mm) Die width1650(mm)Max Dia Of Unwinder1500(mm)Maximum diameter of winding and unwinding (mm)Ф1200Unwinding automatic deviation correction stroke±100(mm)Total power160(kw)Gas flow rate (m3/min)0.6Total water supply (m3/min)0.3Overall dimensions (length × wide × High)12×10×3.5Total weight (t)25Detailed Photos  Quality standardsEquipment Acceptance Standards(1) Acceptance Standards1) Composite Line Speed: 20-150m/min2) Composite Width: Flat fabric 1500mm3) Trial Machine Acceptance Period: The entire machine should run continuously for eight hours (under normal operation)(2) Composite Quality Requirements:1) Firm adhesion, no obvious peeling. When using coating materials of the same variety as the plastic woven fabric, the adhesion peel strength should not be less than 3N/30mm width. (National Standard GB8947-88)2) The coating should cover the width of the base fabric without obvious horizontal lines or missed coating. The coating edge width should not exceed 5mm.3) The coating should have a uniform thickness, consistent color, and no bubbles, black spots, streaks, or hard lumps.4) Smooth and neat winding, with a deviation of ±5mm on the end face, and consistent tension.5) The surface should be clean and free from any foreign matter." Packaging & Shipping  After Sales Service1. Our company conducts material testing before the equipment leaves the factory and invites users to conduct preliminary inspection cooperation before shipping.2. Responsible for the installation and debugging of the equipment, ensuring that the debugging is completed within the time specified in the contract, and ensuring that your company produces normally on schedule.3. We implement a "three guarantee" policy for the products sold, with a term of one year. During the "three guarantee" period, our company is responsible for free repair and replacement of any damage to critical parts (excluding improper operation and vulnerable parts).4. We voluntarily undertake any troubleshooting of the equipment caused by design and material defects and received notice within 12 months from the date of acceptance, ie free maintenance (except for human error), troubleshooting.Commitment: 24 hours in the Pearl River Delta, 48 hours in South China Central China, 72 hours in Northeast China, Southwest and other areas.Other:Provide a set of tools for freeOne copy of operation manual of frequency converter in Chinese  FAQ1.Are you factory or trading company?We are the factory which have been manufacture for more than 10 years.2.What is the delivery time?It is 2-3 months if the goods are out of stock.3.What is the Payment?TT(bank transfer), LC at sight, all will be accepted.4.Is OEM & ODM available?1). We can do the product according your design2). We can provide customiz