D Shape Head Nail Making Machine

Quick DetailsCondition:NewProduction Capacity:≤ 700 pcs/minVideo outgoing-inspection:ProvidedMachinery Test Report:ProvidedMarketing Type:New Product 2020Warranty of core components:1 YearCore Components:PLC, Engine, Bearing, Gearbox, Motor, GeaPlace of Origin:Anhui, ChinaBrand Name:SSSWarranty:1 yearPower (kW):14Key Selling Points:high efficientWeight (KG):4500 KGAfter Warranty Service:Video technical support, Online support, Spare parts, Field maintenance and repair serviceLocal Service Location:NoneApplicable Industries:Manufacturing PlantShowroom Location:NoneProduct name:Nail Making MachineApplication:nail makingNail Diameter:2.5-5.0 mmNail Length:70-150 mmSpeed:700 pcs/minPower:14 kwDimension:1650*1250*1300 mmWeight:4500 kgVoltage:380V 50Hz 3-phaseCertification:CE ISOSupply Ability50 Set/Sets per MonthPackaging & DeliveryPackaging Details:wooden boxPort:shanghai      Lead Time:Quantity(Sets)1 - 1>1Est. Time(days)30To be negotiated     00:00   00:53Product Description    High Speed Nail Making Machine-D90The machine is a high-speed energy-saving nail-making equipment, mainly used for high-quality pneumatic nail and ordinary loose nail production. Especially apply to dome head brads and strip nails production under requirement of small diameter, big nail head, consistent nail shank.   About Machine1. Long service life,no less than the traditional common nail making machine, for at least seven years.White belt at low cost and long life which is 5-6 months without an incorrect operation.2. Automatic oiling , few lubrication points,much less than traditional machines and other nail making machines on market. It is still very tidy when operating.3. High Production. 30% more capacity than other factory machine.4. No dismantle if not change nail mold specifications which can work for 3 months. Nail cutter 8-10 months. Punch time is five times than ordinary equipment depending on the actual using status.5. Nail cutter do cutting without touch, shear number can reach at least 800 million times (8,000,000 is the cutting times of wire diameter 2.0 mm, rough wire diameter will multiplied); low noise and no power waste can bring low consumption of nail mold, no crack, no fixed mold raw wear, no mold clogging, a single pair of nail mold can cut at least 50 million times, punching is more than 25 million times. Nail cutter, nail mold, punch can be repaired for many times at the same cost compared with general equipment.6. Super energy-saving: actual consumption of High- speed nail making machine is about 7 KW,1 ton nail output can save electricity about 20 degrees; while 2.5 sets of ordinary nail making machine consumption is 5-6 KW due to long slide stroke and multi sliding friction parts7. 60% labor saving because of its high efficiency. Coiling nails efficiency gains at least 50% with a high-frequency welding machine as each nail is quality product without stuck and stop, even if in the speed of 1900 nails/min, coiling speed can improve 30%, so that can reduce 40% labor cost.           SpecificationModelSSS-ZDJ-X50SSS-ZDJ-X90SSS-ZDJ-D90SSS-ZDJ-X130SSS-ZDJ-X150Nail diameter1.9-3.0 mm2.0-3.5 mm2.0-3.5 mm2.4-4.0 mm2.5-4.8 mmNail length32-60 mm45-90 mm45-90 mm70-130 mm70-150 mmSpeed≤ 800 pcs/min≤ 760 pcs/min≤ 680 pcs/min≤ 680 pcs/min≤ 700 pcs/minRated power7 kw7 kw7 kw7 kw14 kwDimensions(mm)1350*850*11701500*800*16001350*1220*10501500*800*16001350*1220*10501500*800*16001350*1220*10501500*800*16001650*1250*13001500*800*1600Weight2200kg2800kg3000kg3000 kg4500kg       Main AdvantagesCompared with common machine, ours has below advantages mainly:1. Defective rate is below 1/100,000;2. 1 worker can operate 10 machines at same time and skillful worker is not need because of easy operation & maintain;3. Labor cost saved 50% - 70% for nail making;4. Labor cost saved 35% - 45% for coil nail making;5. Us$18 can be saved to produce 1 ton nails (in China);6. High pressure air pump is not needed;7. Spare parts have long service life with low prices.Details Images   Nail Cutter Holder Adopts Pendulum Structure1. Shorter stroke and lower mechanical wear.2. High precision, nail cutters work without touch with longer service life.3. One set of cutters' cutting times up to 10 million times.Unique Patent, Double-dies and Double-punches Structure1. Bigger nail heads can be easily gotten2. Nail heads are always very round and in the center.3. Nail head without knock marks, consistent and good looking4. Uniform thickness and diameter of the nail head.     Feeding and Anti-backing Structure1. High-precision feeding unit. Length difference can be controlled within 0.3 mm2. With unique wire feeding and anti-backing structure, the nail scraps can be completely separated from the nail shank to ensurequality.Wearing parts         Nail Cutter Clamping Die Belt Punches     Company ProfileCOMPANY INFORMATIONSSS HARDWARE INDUSTRY CO.,LTD, founded in 2005, specializes in staples, collated nails, welding wires and threaded rods. Our factor