More than 30 years professionally produce the high quality
refrigerating products,export a lots around the world every
year. Famous brand compressor,stable excellent quality,working
highly efficient in an energy-saving way.We can supply a complete
range of refrigeration products,including China best home
refrigerator, chest freezer,beverage cooler and ice cream showcase,
wine cooler, ice maker, cake showcase, kitchen refrigeration
equipment, cold room and -86 degree blast freezer etc..Product
Application:This commercial flake ice maker / ice cube maker / ice
machine is widely used in hospitals, schools, labs, supermarkets,
food preservation, fishing refrigeration, medical applications,
chemical,bakery,grocery,bar,club,cafes and food processing
industries, convenience stores,catering place etc. And for frozen
food,such as soft drink,coffee,beverage,wine, ice cream cake,
meat,seafood and so on that's to maintain a fresh
state.Full-auomatic flake ice maker machine/ice cube maker/ice
maker/ice machineCommercial Refrigerated
Products Full-Auomatic Flake Ice Maker / Ice Making
Machine / Cube Ice Maker MachineFeature:Simple structure,cover
a small area;Simple operation with PLC programmable control system,
ice full automatic stop;High efficiency of ice making,continuous
ice production,can produce ice 1~3 minutes after starting;Flake ice
without sharp edges and corners will not damage the surface of the
refrigerated products;The large area of flake ice can effectively
keep fresh quickly.Flake ice maker:ModelIce capacity
(kg/24h)Cooling capacity (kw)Compressor power(kw)Reducer
powwer(kw)Pump power (kw)N.W. (kg)Cooling system dimension(mm)Unit
dimension(mm)DFI-0.3T3001.951.80.180.09162800*780*630800*850*1780DFI-0.5T5003.252.50.280.09210800*780*700800*850*1850DFI-1.0T10006.54.80.370.092401280*800*8601280*1100*1920DFI-1.5T15009.757.30.370.093591280*800*9601280*1100*2020DFI-2.0T2000138.50.0370.124301500*1100*10001500*1400*2400DFI-2.5T250016.259.70.370.125001500*1100*10501500*1400*2450Installation
instructions:1. the refrigerating machine placement(1) the machine
should be placed in the air circulation, safe and clean place.(2)
the machine should not be placed outdoor, unfavorable under direct
sunlight and rain.Not near the heat source.(3) the use of the
machine environment cannot be lower than 5 ºC, no more than 38
ºC.(4) around the machine should have enough space, especially the
back not less than 250 mm.In order to machine the cooling.(5)
please adjust the machine at the bottom of the anchor bolt to
ensure smooth placed level.2. the installation of a water system(1)
please plug in accordance with local water source of drinking water
standards.(2) connected to the filter when necessary, in order to
improve the standard of drinking water.(3) the water supply system
must meet the following conditions.A. the lowest temperature 2 ºC,
the highest do not exceed 38 ºCB. water pressure the lowest 0.02
Mpa, the highest 0.8 Mpa3. the installation of power supply(1) the
power supply must be consistent with the machine indicated on the
nameplate.(2) all lines must be in conformity with the national
standard.(3) must be reliable grounding, grounding wire must meet
the electrical standards.(4) voltage fluctuation may not exceed the
rated voltage of plus or minus 10%.Instructions:1. ice making
process(1) must be checked before starting the automatic water
supply device is normal, the tank to save water is reasonable (the
machine factory has just the water level, the user can be
reset).(2) the plug in the power supply, ice making machine began
to work, first of all, the pump running, the exhaust air pump has a
short process) compressor started about two minutes later, into ice
making machine.(3) when to set the thickness of the ice thickness,
ice plate probe began, electromagnetic valve start to work, water
pump stop working, and the heat into the evaporator, about 1.5
minutes of ice.When I fall on the ice to the ice dampers inside out
and open the magnetic reed switch.When magnetic reed switch closed
again, the machine into the ice making process again.(4) the
compressor in the entire process of ice and ice off, don't stop.(5)
when water ice barrel for a full, magnetic reed switch cannot be
automatically closed, the machine automatically stop working, and
when taken enough ice, magnetic reed switch after reclosing time
delay machine start after 3 minutes, back into the ice making
process.2. the thickness of ice bridge is(1) the thickness of the
ice bridge should be about 3 mm, between the probe and the
evaporator international should be thicker than the actual
thickness of the ice bridge 1.5 mm or so, mouth turn adjusting
screw clockwise to increase the thickness of the ice bridge (screw
rotation 1/3 circle ice bridge thickness change 1.5 mm).(2) check
the ice plate probe connections and bracket, should guarantee the
free rotation after each process of ice can be returned to the
right place.The cause of the problem:The ice maker com
Related products about 1000kg/24h Stainless Steel Portable Automatic Flake Ice Machine for Supermarket
- Waste Tyre Plastic Recycling Machinery Machine Tire Crusher Production Line Rubber Crumb Grinding Machine Equipment Tire Shredder
- Stretch Plastic Blowing Pet Bottle Making Blow Molding Machine Bottles Stretch Automatic Pet Bottle Blowing Machine
- Waste Plastic Pet Bottle, Water Bottle Flake, PP/HDPE/LDPE PE Film Jumbo Woven Bags Plastic Crusher Machine, Plastic Crushing Washing Recycling Machine
- Type 2 Wall-Mounted Electric Car Charging Station 7kw /11 Kwelectric Vehicle Charging Station Home Wallbox AC EV Charger Single Phase or 3three Phase
- G-View G12W Wholesale Auto Car LED Headlight Bulb High Power H13 H11 9005 H7 H4 Car LED Headlights LED Car Lights
- New Design Porcelain Round Plates Dinner Set for Wedding and Banquet
- China 2023 New Design Super Soft 100% Polyester Microfiber Knitted Oversized Decoration Hoodie Blanket
- Handmade Art Creative Materials Thickened White Paper Cup DIY Disposable Handmade Colored Paper Cup