Planetary Mixer with High Quality Made in China

 MP series planetary concrete mixer  adopted Germany technique used for mixing concrete .It is not only applies in common concrete ,precast concrete but also in high performance concrete. Detail production   Motion trackMotion track :the revolution and rotation speed of the blades have been extensively studied and tested to give the mixer a high output without causing the segregation of materials with diffrernt grain size and weight.the movement of the material inside the trough is smooth and continuous.As shown in the picture,the blades track covers the whole bottom of the trough after a cycle.Gearing deviceGearing system:the power transmisssion is realized by a hard surface gear which is designed specially by our company.Fluid clutch is installed between the motor and the gearbox. It can keep the mixer start up normally even in the full load condition.The driving force provided by gearbox drives the mixing arms to do not only have a rotation but also has a revolution,the more complex of the motin track,the more turbulent the mixing is,and then the mixer works more effectively ,its mixing more homogeneos.  The security of the maintenance door deviceAccording to market demands, reliable high-sensitive security switches are used in the maintaining door to make the maintaining work safe and convenient.Discharging deviceDischarging device: according to the different demands of customers, the discharging door can be opened by hydraulic, pneumatic or by hands. The number of the discharging door is three at most .And there is special sealing device on the discharging door to ensure the sealing reliable.   Security device of lifting hopperthe security device of skip hopper safeguards against head-clashing when the hopper is climbing up.Hydraulic pump stationSpecial designed hydraulic power unit is used to provide power for more than one discharging gates. On emergency, these discharging gates can be opened by hand.  Mixing deviceMixing device: driven by the gearing system, the blades fixed on mixing arms and the scarpers arms crush and overturn the material to complete the compelling mixingAccess doorMaintaining door: according to the market demands, reliable high-sensitive security switches are used in the maintaining door to make the maintaining work safe and convenient.   Sprinkler headThe special designed sprayer is installed on the water pipe .the spraying water cloud can cover more area and also make the mixing more.Viewing portThere is an observing port on the maintaining door .You can observe the mixing situation without cutting off power.  MP company can long-termly supply the wearing parts.Enhance the hopperhe skip hopper can be chosen according to the requirements of customers. The feeding door automatically opens when feeding door automatically opens when feeding, and closes when the hopper begins to descend. The device effectively prevents the dust overflow the trough during the mixing to protect the environment.  Temperature and moistureTemperature and moisture sensor: To ensure concrete and prefabricated parts quality. the sensor of temperature or moisture made in BIKOTRONIC in Germany can be selected to measure temperature or moisture of material being mixer.Weighing system According to the requirements with powder measure, the aggregate metering and water metering.  Dust catcherThe mixer equipped with dust catcher dust catcher to protect the environment.Control systemThe control system can automatically control the process of dosing, mixing and discharging.ItemTypeMP250MP330MP500MP750MP1000MP1500MP2000MP2500MP3000Intput capacity(L)375500750112515002250300037504500Output capacity(L)25033050075010001500200025003000Output capacity(kg)6008001200180024003600480060007200Diameter of mixing trough(mm)130015401900219224962796310034003400Mixing power(kw)111518.53037557590110Discharging power(kw)2.22.22.22.233444Scraper(nr)1/21/21/21/32/42/43/63/63/9Paddle111111111Discharging paddle---111222Weight(kg)12001700200035006000700085001050011000mm Dimension(L*W*H)1570*1480 *17501862*1850*18552220*2071*18802550*2295*21952893*2606*22173223*2906*24253625*3235*26303893*3555*26953893*3555*2975Lifting power(kw)3447.5111518.5--ABOUT US:As your one-stop source, AT PRECAST,we design, manufacturer and distribute precast concrete accessories including the Lifting Systems and Anchoring systems Coil and Ferrule Inserts. for Concrete and Prefabricated area.As a leader in developing concrete accessory products, our main goal is to produce products that are safer, faster and more cost efficient.With more than totally 50 years working experience, our entire staff is dedicated to provide you with the best customer service and competitive prices. Our sales force are able to answer your questions quickly and offer you technical support .Assurance, 100% quality manufacturing. We guarantee that our products meet your supplied specifications Extremely competitive pricing Delivery to your port or front door 4 ---- 8 week lead times We han