AAC Block Automatic Concrete Machine Holland Brick Machine

AAC Block Automatic Concrete Machine Holland Brick MachineAAC Block Automatic Concrete Machine Holland Brick Machine IntroductionHongfa factory with 80 production line plants abroad AAC (Autoclaved aerated concrete) block Main raw materials of AAC are siliceous material (sand, fly ash, and Silicon tailings) and Calcium materials (lime and cement) mixed with a foaming agent (aluminum powder).It is the product of light porous silicate through the following processes: batching, mixing, pouring, hardening, cutting, autoclaving and curing etc. Because of large amount of well-distributed tiny pores after foaming, it is named autoclaved aerated concrete. AAC Classification: In general, it can be classified according to the types of raw materials, manufacturing process and functions.Based on the shape of AAC products, it can be divided into: AAC blocks and AAC panels. It is a revolutionary material offering a unique combination of high durability and strength, low weight, excellent heat insulation, fire resistant, noise absorption, unprecedented buildability and superior ecological green features. In China, AAC is one of the light wall materials which was popularized and applied at the earliest and the most widely.   AAC Block Introduction    AAC Block Automatic Concrete Machine Holland Brick Machine raw materialAAC block raw material required performance:Fly ash: A lot has been said about this raw material in this Project Profile itself. But this Raw material is freely available inThermal Power plants. There are no taxes on this item whatsoever. Transportation charges are only to be attended by theentrepreneur.Sand (65-70%): The core raw material of AAC product; the main resource of silica-aluminum components; correspond with JC409-91, the clay should less than 4%.Lime(12-20%): One of the main raw materials of fly ash AAC; the main effect is to provide efficient calcium oxide with cooperation of cement making calcium oxide react with SiO2, Al2O3 in hot water then to produce calcium silicate hydrate. Therefore, lime is also the main resource of strength. Effective calcium oxide of lime should not less than 65%, over 80% is perfect and should accord with JC/T621-1996.Cement(8-10%): This Project aims to utilize OPC cement as main binder material. It will give faster strength to the bricks,besides giving improved consistent quality. It also ensures a better cost effectiveness for the same. Using OPC will be astandardized practice. The other prime advantages of using OPC (compared to other binders) is it's easy availability locallythrough nationwide Retail Network of Cement Companies.Gypsum(1-2%): Gypsum is the foaming regulator in AAC which dispels quicklime and postpones slurry's densification.CaSO4 should be more than 70%.Aluminum Podwer(0.074%): It is the forming agent type and recommendation for supply depend on raw materials and mix formula:A lot has been said about this raw material in this Project Profile itself. But this Raw material is freely available in Thermal Power plants. There are no taxes on this item whatsoever. Transportation charges are only to be attended by the entrepreneur.Manufacturing Technique with AAC Block Automatic Concrete Machine Holland Brick Machine   Raw material dealingPut the fly ash or sand into the ball mill to mill via the conveyor belt, after milling, put the slurry into the slurry storage tank by slurry pump.    Batching, mixing and pouring processThe lime, cement will convey by conveyor to the dry powder measure scale to scale separately. The slurry convey by slurry pump then to the automatic scale;the power and slurry put into the mixer,pouring into the mould.   Curing processAfter slurry pouring into the mould, put the mould box into the curing room with 50~70ºC. After 2-3 hours curing, the blocks become soft solid and ready for cutting.   Cutting processCutting size can be adjusted flexibly, with 0 broken rate.    Aerated autoclaved processFinished product cutting using semi-product crane carry to the front of autoclave grouped, hoisting machine or dragger will drag steam trolley into autoclave to steam,it need 6-10 hours.    Finished block dealing processAfter 6-10 hours, finished products come out of autoclave, with separting machine to separate blocks layer by layer.    Packing processUsing finished block carry hanger clamp the finished product to package line on wooden pallets,after package, then by forklift transport the finished products to piled yard according to specifications to stack.Packing&Shipping for AAC Block Automatic Concrete Machine Holland Brick MachineWhat Service We Offer    Pre-sales technical supportAccording to each customer's demand and budget, we offer you the professional solution, process flow design and production equipment. More importantly, welcome every customer to visit our factory and working machine in the site before placing the order. We will arrange cars, hotels and translators for the visiting customers.  After-sales technical supp