Fast Response Carbon Brazing Maintenance Production Line with Unwinding Length Setting Device

Product DescriptionThe production line is composed of front-end conveyor, unwinding device, unwinding and length setting device, cutting device, milling inclined plane processing host at both ends, cutting angle processing host at one end, and back-end conveying and stacking system. After the carbon fiber board is extruded into a roll, the front unwinding of the front-end conveyor is carried into the milling inclined plane equipment successively by the traction roller according to the set processing requirements. After the processing is completed, it is output by the back-end conveyor, reverse conveying and positioning the other end, Then, the carbon fiber board is transported out of the processing unit and transported to the user's stacking platform by the transport truss manipulator after the rear end conveyor frame is positioned.Note: The conveyor frame, unwinding device, unwinding length setting device, cutting device and stacking platform at the front of the production line shall be provided by Party A.  Product ParametersMilling inclined plane unitSerial NoProjectSpecifications1Stroke of each axis (machine part)X:1100mmZ1,Z2:300mm2X. Z-axis transmissionFeed motor: AC servo motorX-direction lead screw: φ 50X10mmZ-direction screw rod diameter: Φ 50X10mm3Fast moving speedX:6000mm/min, Z:6000mm/min4Working feed speedX and Z axes: 1-5000 mm/min5Machine tool accuracyPositioning accuracyX:0.03mm/1000mmZ:0.02mm/total length6CNC systemTaiwan's new generation system7Spindle power7.5Kw (servo)8Spindle speed200-3000rpm9Air Pressure0.6MPa10Overall dimensions of main engine (L * W * H)About 2800 mm * 1000 mm * 2300 mmCutting bevel unitCutting bevel unitSerial NoProjectSpecifications1Stroke of each axis (machine part)X: 1600mm (angle 1:5)Y: 350mm (angle 1:5)Z: 300mm2X,Z-axis transmissionFeed motor: AC servo motorX-direction lead screw: 50X10mmY-direction lead screw: Φ 40X10mmZ-direction screw rod diameter: Φ 50X10mm3Fast moving speedX/Y/Z:6000mm/min4Working feed speedX and Z axes: 1-5000 mm/min5Machine tool accuracyPositioning accuracyX:0.03mm/1000mmY:0.02mm/total lengthZ:0.02mm/total length6CNC systemTaiwan's new generation system7Main motor power5Kw (servo)8Spindle speed200-3000rpm Tool sizeΦ300X3.5Carbide saw disk9Air Pressure0.6MPa10Overall dimensions of main engine (L * W * H)2850X2000X2100Conveyor carrier unitSerial NoProjectSpecifications1Roller conveyorMaterial: aluminum profile80m long, segmented splicing structure2X-axis clamping moving unitQuantity: 2 setsTravel ≥ 80mPneumatic clamping and jacking are adopted, and the clamping force is adjustable.3Side positioning devicePositioning accuracy ± 2mm4X axis feed speedAdjustable speed: 0-20m5X axial positioning accuracy±2mmManipulator stacking unitSerial NoProjectSpecifications1Travel of each axis of manipulatorY-axis stroke: 1250mmZ-axis stroke: 300mm. (With 900 height as the reference, the upward stroke can be 250mm, and the downward stroke can be 50mm)2Applicable plate specificationThe width is 150mm, and the width can be expanded in the later stage: 105-210mm.Plate length: 80 m.Plate thickness: 5mm.3Motion speed of each axis10-10000mm/min4Sheet stacking accuracyUpper and lower layer error ± 2mm, left and right error ± 2.5mm, end error ± 5mm5Synchronous accuracy of each axis of truss±1mm6Repetition accuracy of each axis of truss±1mm  Detailed Photos   After Sales ServiceCompany Profile1.General InformationChangzhou Faer Lin Precision Machine Co., Ltd. is located in Bingjiang economic development zone, new north district, Changzhou , Jiangsu, China. The whole plant area is 30006m2 with 15000m2 construction area.Our business grows dramatically during the past 5 years that the sales revenue develops from RMB 5 million in 2012 to RMB 50 millions around in 2016. The company was evaluated as Jiangsu high-technology enterprise in 2015, that we have 22 high-technology products and more than 20 patented technologies.Faer Lin is dedicated to build first-class technology developing system and train a expert team, in order to produce reliable automatic line and CNC special machine with high accuracy and high efficiency. 2.Company TeamOur shareholders and management team members are excellent talents from Jiangsu Duoleng CNC machine Co., Ltd.(Former was Changzhou General Machine Factory) who has more than ten years good experience in state-owned company management, product design, sales, R&D, manufacturing process and production. These excellent talents ensure we can have smooth and health development. Currently, we have 70 employees, 2 of them are certified with senior professional title, 21 with medium-grade professional title and 25 with junior professional title. It helps us to have capability to develop and manufacture first-class CNC machine and special machine.We run and manage the company according to joint-stock company requirement since it was founded. We have clear and reasonable organization, which make sure our company operate efficiently and smoothly. Cert