JLM-106M CNC Machine Tools Machinery for Metal Cutting Milling Turning

    JLM-106M Max. swing diameter over bedmm∅400Control system MITSUBISHI M80BMachining Max. swing diameter over camiagemm∅350 Interface Spec.-BMT55capacityMax. turning diametermm∅400Tool Center heightmm100 Interference diameter ofadjacent tool machiningmm∅200turretCutter diametermm∅330 Max. machining lengthmm300 Numbers of toolspcs12 Max. stroke of Z axismm370 Shank diameter of square tool holdermm25 Max. stroke of X axismm260 Shank diameter of boring tool holdermm40 Motor power of Z1 axisKw2.2 Numbers of driven toolspcs12 Motor power of X axisKw2.2 Driven tool lock-ER25 Rapid traverse of X / Z1 / Z2 axism/min25 Driven power of driven tool motorkw3.7SpindleSpindle nose-A2-5 Max. Torque of power tool motorNm20 Spindle diametermm∅170 Max. speed of driven tool motorrpm6000 Bar specification (Standard/Optional)mm∅45TailstockDistance between centersmm370 Supporting chuckinch6" Drive Mode-- Motor power (continuous / 30min)Kw5.5/7.5 Center interfacemk- Max. speedrpm6000Appearance Machine tool appearancemm2360*1840*1900 spindle motor torque (rate/max)Nm35/47.7& WeightMachine tool weightKg3900 spindle motor current (continous/30min)A32/48     C-axis resolution1/n1024/32768    JLM Series CharacteristicsJLM-106 / JLM-106M JLM-508 / JLM-508MJLM-1012 / JLM-1012MJLM-1 series adopts the compact design concept, especially for machining shorter parts, to provide customers with a turning and milling composite center with high cost-effectiveness.JLM-5 series is specially designed for machining ultra-long part. The effective machining length in Z axis is 500mm, and the outer diameter taper of machined product at the maximum stroke is less than 0.008mm, which is much excellent than the industry standard and national standard.  JLM-10 series machine is designed to have a slant bed and a saddle with large span, achieving better rigidity and stable cutting performance.with a large swing over bed and an effective machining length of more than 1,000 mm, both long-axial and disc parts can be machined by this series machine. The machine is equipped with standard MT5 servo tailstock, with high precision and fast speed. It is also optionally provided with a variety of optional accessories, such as steady center rest and servo follow rest, which can provide more machining solutions for customers. JLM series is the type of general-purpose machine, which equipped with high-rigidity bed and roller linear guide rail, combined with the advantages of heavy cutting and fast travel, and fixed with standard hydraulic tailstock under programmable control, so it can meet the machining demand of customers to the greatest extent. With Its powerful cutting performance and extreme machining accuracy, the JLM series CNC lathe and CNC milling and turning machine of Jhenjet Intelligent combines the advantages of high spindle motor power, high-rigidity bed and turret to provide customer with efficient machining capability.   Base Integrally formed rigid structure Add specific trace elements to improve stability 30-degree inclined bed Easy for chips removal, close-distance operation, and handling BMT Driven Tool Turret SeriesAchieve a quick tool change for a cycle (1# to 12# tools) within 8 seconds.Have more stable tool locking mode, a repeatability of +/-0.002mm, and positioning accuracy of +/- 0.005mm.Have a driven tool holder speed of up to 6,000 rpm, providing a better torque and machining efficiency.    CNC systemThe Mitsubishi system is the best choice to provide you with stable multi-axis combined machining, and it can optimize your product process while ensuring better product consistency, improving your machining effciency.  Meanwhile, its after-sales service is as timely and efficient as expected by Jhenjet Intelligent.  Hydraulic SystemKorea or Japanese hydraulic system is adopted to improve equipment stability.    SpindleThe spindle is supported by front three and rear two roller bearings to improve the rigidity of the spindle and reduce the runout of the spindle. The spindle has a strong hydraulic clamping force to facilitate the replacement of collets and chucks.  Screw rod and guide railThe screw pitch in X and Z directions is perfectly matched to create a more perfect appearance effect and an excellent rapid feeding.    Internal                                                                                                                 WorkpieceJhenjet Company Profile -Brand "JSMART"Jhenjet Intelligent has a history of 30 years since its establishment in Taiwan. It has focused on the machining and the manufacturing of key parts and components of machine tools. It also serves as an agent for many Japanese enterprises.Since it was put into operation in Guangdong Province in 2014, Jhenjet Intelligent has been committed to become amanufacturer and supplier of specialized turning & milling composite center.In 2018, it passed the national high-tech enterprise certification and had more than 10 machine tool patents. At present, its eight produc