QLM-508M CNC Lathe High Precision Turning and Milling with Spindle + Y-Axis

  ParametersQLM-508M Max. swing diameter over bedmm∅500Control system MITSUBISHI M80B Max. swing diameter over camiagemm∅450 Interface Spec.-BMT55 Max. turning diametermm∅420 Center heightmm100 Interference diameter ofadjacent tool machiningmm∅200Tool Cutter diametermm∅330 Max. machining lengthmm500turretNumbers of toolspcs12Machining Max. stroke of Z axismm580 Shank diameter of square tool holdermm25capacityMax. stroke of X axismm270 Shank diameter of boring tool holdermm40 Max. stroke of Y axismm+/-50 Numbers of driven toolspcs12 Motor power of Z1 axisKw3 Driven tool lock-ER25 Motor power of X axisKw2.2 Driven power of driven tool motorkw3.7 Motor power of Y axisKw3 Max. Torque of power tool motorNm23.6 Rapid traverse of X / Z1 / Z2 axism/min25 Max. speed of driven tool motorrpm6000 Rapid traverse of Y axism/min15TailstockDistance between centersmm580SpindleSpindle nose-A2-6 Drive Mode-Programmablehydraulic pressure Spindle diametermm∅200 Center interfacemk4# Bar specification (Standard/Optional)mm∅52/∅65Appearance Machine tool appearancemm2850*2110*2090 Supporting chuckinch8"& WeightMachine tool weightKg5400 Motor power (continuous / 30min)Kw7.5/11     Max. speedrpm4200     spindle motor torque (rate/max)Nm47.7/70     spindle motor current (continous/30min)A46/64     C-axis resolution1/n1024/32768    QLM Series CharacteristicsQLM-506 / QLM-506M / QLM-506CQLM-508 / QLM-508M / QLM-508CQLM-510 / QLM-510M / QLM-510C* The machine integrates multiple functions including turning, milling, boring, and tapping, and combines C axis, Y axis and spare axis, which effectively reduces the produce changeover time, avoid artificial error, and simplify the fixtures. * Adopt standard automatic receiver, optional automatic feeder, and chip cleaner to improve machining efficiency.* QLM series machine adopts orthogonal Y-axis design, which has higher precision than the difference-compensated Y-axis design. The Y-axis stroke reaches 100mm. It has strong machining capability and low interference. * Because of the Y-axis function, the machining mode of QLM series products is in the same way as a machining center equipped with a fourth-axis rotary table. (X,Y, Z axes are the same as the X, Y, Z axes of the machining center, and C axis is the same as the four axis rotary table);* The integration of turning machine and machining center into a machine tool will greatly save manpower, reduce machining time, floor area and the purchase cost of machine tools and fixtures, as well as reducing various uncertainties caused by multiple times of clamping and handling of workpieces.   Base Integrally formed rigid structure Add specific trace elements to improve stability 30-degree inclined bed Easy for chips removal, close-distance operation, and handling BMT Driven Tool Turret SeriesAchieve a quick tool change for a cycle (1# to 12# tools) within 8 seconds.Have more stable tool locking mode, a repeatability of +/-0.002mm, and positioning accuracy of +/- 0.005mm.Have a driven tool holder speed of up to 6,000 rpm, providing a better torque and machining efficiency. Have a perfect U-shaped design to make center of gravity more concentrated and realize higher stability and higher precision. Have a dual-motor design to realize fast two-way tool selection and forward and backward machining. Adopt three-piece clutch locking device to provide extremely strong hydraulic locking force.    CNC systemThe Mitsubishi system is the best choice to provide you with stable multi-axis combined machining, and it can optimize your product process while ensuring better product consistency, improving your machining effciency.  Meanwhile, its after-sales service is as timely and efficient as expected by Jhenjet Intelligent.  Hydraulic SystemKorea or Japanese hydraulic system is adopted to improve equipment stability.    SpindleThe spindle is supported by front three and rear two roller bearings to improve the rigidity of the spindle and reduce the runout of the spindle. The spindle has a strong hydraulic clamping force to facilitate the replacement of collets and chucks.  Screw rod and guide railThe screw pitch in X and Z directions is perfectly matched to create a more perfect appearance effect and an excellent rapid feeding.  JLM-508M Internal                                                                                           WorkpieceCompany ProfileJhenjet Intelligent has a history of 30 years since its establishment in Taiwan. It has focused on the machining and the manufacturing of key parts and components of machine tools. It also serves as an agent for many Japanese enterprises.Since it was put into operation in Guangdong Province in 2014, Jhenjet Intelligent has been committed to become amanufacturer and supplier of specialized turning & milling composite center.In 2018, it passed the national high-tech enterprise certification and had more than 10 machine tool patents. At present, its eight products have passed the high-tech product certification