Vtc-40s Five Axis Machining Center Gantry Switchboard Type

  1.INFORMATION OF FIVE-AXIS MACHINING CENTER SERIESProduct DescriptionDESCRIPTION      The five-axis linkage machining center is also called the five-axis machining center. It is a machining center with high technological content and high precision specially used for machining complex curved surfaces. Equipment, high-precision medical equipment and other industries have a decisive influence. The five-axis linkage CNC machining center system is the only means to solve the processing of impellers, blades, marine propellers, heavy generator rotors, steam turbine rotors, large diesel engine crankshafts, etc.  FEATUREFEATURE     1. An innovative model with viaduct-type optimized design, the motion transmission mechanism is effectively isolated from the workpiece processing area, and while optimizing the motion environment, it expands the range of workpiece materials that can be processed (such as graphite, ceramics).    2. The door-type base of the overall frame is rigid enough to be self-heavy, and the natural frequency is improved by anti-vibration and vibration isolation, and there will be no resonance and flutter phenomenon.   3. Thermal symmetry, single-screw mid-drive, crossbeam moving back and forth, excellent synchronous movement and linkage effect.   4.Small footprint, suitable for production line layout.    5.A number of patented technologies and the refinement and sublimation of more than 30 years of experience in the industry, the perfect combination of technical indicators such as speed, efficiency, precision, operation comfort, and flexible expansion.   SpecificationUnitVTC-40S/1Gantry switchboard vertical machining centreVTC-40SGantry High Speed vertical machining centerVTC-650GHigh-speed engraving and milling machinesWorkbench specifications (W x L)mm2-400×600400×800500×600Max. workbench loadkg2-350800800X/Y/Z axis coordinate travelmm500/400/450500/400/450600/500/450Distance from spindle end toworkbench surfacemm120~570180~630180~630X/Y/Z axis rapid movement speed  m/min30/30/3036/36/3018/18/18Feed cutting speedmm/min5~80005~100005~15000Spindle speed range          r/min60~12000 100~15000 200~30000 Spindle motor power (nominal/intermittent)kW5.5/11(S1/S3-15%) 9/15(S1/S3-25%)7.5/11(S1/S3-25%)Spindle output torque (nominal/intermittent)Nm 26.3/70(S1/S3-15%)57.2/118(S1/S3-25%)5.97/8.76Tool holder type/maximum tool weightkgBT40 /7          BBT40 /7 HSK-E40 /5Tool magazine capacity/form 2/16/24 optionalPositioning accuracy/repositioning accuracymm0.010/0.005  (VDI/DGQ 3441 standard)Machine size:L*W*Hmm1450×4000×2000Machine.Weight approx.kg800075007500Extended models for gantry machining centre  UTC series cradle-type five-axis machining center Machine Features1.Double-arm cradle-type CNC turntable, both the tilting axis and the rotating axis have large apertures, and the radial axis is supported by bearings, which is very rigid and resistant to heavy cutting.2. The heavy-duty tilting shaft adopts imported brand worm gear, which is wear-resistant and has high precision.3.The tilting axis, rotating axis and supporting axis all adopt encircling hydraulic brake mechanism.4. The spindle configuration scheme is flexible, it can be matched with the conventional BT40 direct-coupled spindle, or the built-in electric spindle with a speed up to 20000r/min (BBT40 or HSK A63 tool holder). The spindle configuration scheme is flexible, it can be matched with the conventional BT40 direct-coupled spindle, or the built-in electric spindle with a speed up to 20000r/min (BBT40 or HSK A63 tool holder).1.UTC-300S type: A/C axis layout, 5-axis control and 5-axis linkage (or any 4-axis linkage with higher cost performance), wide application range.2.UTC-300SF type: A/C axis layout, high-speed DD servo motor drives A/C axis, of which C axis can be converted into Cs (spindle) working mode, the maximum speed can reach 2000r/min, with turning and milling compound function, can Enables mill-turn machining including high-precision turning.3.UTC-500S type: B/C axis layout, 5-axis control and 5-axis linkage, and the machining diameter is expanded to 500mm. SpecificationUnitUTC-300SUTC-300SFUTC-500SWorkbench specifications             mmØ 320Ø 300Ø 500Max. workbench load            kg120120400Distance from spindle end to workbench surfacemm310~760310~760120~470X/Y/Z axis coordinate travel          mm500/400/450500/400/450500/600/450X/Y/Z axis rapid movement speed      m/min30/30/24 30/30/24 24/24/20Feed cutting speed           mm/min5~15000Rotary workbench (C-axis) rotary range °  0~360°  Tilt axis (B/A axis) rotary range   °A axis:-110°~+110° A axis:-110°~+110°B axis:-110°~+110°C-axis (or Cs-axis) rotary speedr/minMax:25Cs axis,Max:2000Max:25Spindle taper shank Direct-coupled spindle:BT40      or      Built-in spindle:HSK A63Spindle speed range           r/min      Direct-coupled spindle:60~12000      or    Built-in spindle:100~20000Spindle motor power (nominal/intermittent)            kW Direct-coupled spindle:7.5/11 (S1/30min)