QLM-508C Dual Spindle +Y Axis CNC Turning and Milling Turret-Type Lathe-Metal process

    QLM-508C Max. swing diameter over bedmm∅500 Spindle nose-A2-5 Max. swing diameter over camiagemm∅450SpareSpindle diametermm∅170 Max. turning diametermm∅420axisBar specification (Standard/Optional)mm∅45 Interference diameter ofadjacent tool machiningmm∅200 Max. stroke of counter-spindlemm540 Max. machining lengthmm500 Supporting chuckinch6"Machining Max. stroke of Z axismm580 Motor power (continuous / 30min)Kw5.5/7.5capacityMax. stroke of X axismm270 Max. speedrpm6000 Max. stroke of Y axismm+/-50 spindle motor torque (rate/max)Nm35/47.7 Motor power of Z1 axisKw3 spindle motor current (continous/30min)A32/48 Motor power of Z2 axisKw2.2 C-axis resolution1/n1024/32768 Motor power of X axisKw2.2 Interface Spec.-BMT55 Motor power of Y axisKw3 Center heightmm100 Rapid traverse of X / Z1 / Z2 axism/min25Tool Cutter diametermm∅330 Rapid traverse of Y axism/min15turretNumbers of toolspcs12Control system MITSUBISHI M80A Shank diameter of square tool holdermm25SpindleSpindle nose-A2-6 Shank diameter of boring tool holdermm40 Spindle diametermm∅200 Numbers of driven toolspcs12 Bar specification (Standard/Optional)mm∅52/∅65 Driven tool lock-ER25/32 Supporting chuckinch8" Driven power of driven tool motorkw3.7 Motor power (continuous / 30min)Kw7.5/11 Max. Torque of power tool motorNm23.6 Max. speedrpm4200 Max. speed of driven tool motorrpm6000 spindle motor torque (rate/max)Nm47.7/70Appearance Machine tool appearancemm2850*2110*2090 spindle motor current (continous/30min)A46/64& WeightMachine tool weightKg5400 C-axis resolution1/n1024/32768    QLM Series CharacteristicsQLM-506 / QLM-506M / QLM-506CQLM-508 / QLM-508M / QLM-508CQLM-510 / QLM-510M / QLM-510C* The machine integrates multiple functions including turning, milling, boring, and tapping, and combines C axis, Y axis and spare axis, which effectively reduces the produce changeover time, avoid artificial error, and simplify the fixtures. * Adopt standard automatic receiver, optional automatic feeder, and chip cleaner to improve machining efficiency.* QLM series machine adopts orthogonal Y-axis design, which has higher precision than the difference-compensated Y-axis design. The Y-axis stroke reaches 100mm. It has strong machining capability and low interference. * Because of the Y-axis function, the machining mode of QLM series products is in the same way as a machining center equipped with a fourth-axis rotary table. (X,Y, Z axes are the same as the X, Y, Z axes of the machining center, and C axis is the same as the four axis rotary table);* The integration of turning machine and machining center into a machine tool will greatly save manpower, reduce machining time, floor area and the purchase cost of machine tools and fixtures, as well as reducing various uncertainties caused by multiple times of clamping and handling of workpieces.   Base Integrally formed rigid structure Add specific trace elements to improve stability 30-degree inclined bed Easy for chips removal, close-distance operation, and handling BMT Driven Tool Turret SeriesAchieve a quick tool change for a cycle (1# to 12# tools) within 8 seconds.Have more stable tool locking mode, a repeatability of +/-0.002mm, and positioning accuracy of +/- 0.005mm.Have a driven tool holder speed of up to 6,000 rpm, providing a better torque and machining efficiency. CNC systemThe Mitsubishi system is the best choice to provide you with stable multi-axis combined machining, and it can optimize your product process while ensuring better product consistency, improving your machining effciency.  Meanwhile, its after-sales service is as timely and efficient as expected by Jhenjet Intelligent.  Hydraulic SystemKorea or Japanese hydraulic system is adopted to improve equipment stability.    SpindleThe spindle is supported by front three and rear two roller bearings to improve the rigidity of the spindle and reduce the runout of the spindle. The spindle has a strong hydraulic clamping force to facilitate the replacement of collets and chucks.  Screw rod and guide railThe screw pitch in X and Z directions is perfectly matched to create a more perfect appearance effect and an excellent rapid feeding.    Internal                                                                                                                 WorkpieceCompany ProfileJhenjet Intelligent has a history of 30 years since its establishment in Taiwan. It has focused on the machining and the manufacturing of key parts and components of machine tools. It also serves as an agent for many Japanese enterprises.Since it was put into operation in Guangdong Province in 2014, Jhenjet Intelligent has been committed to become amanufacturer and supplier of specialized turning & milling composite center.In 2018, it passed the national high-tech enterprise certification and had more than 10 machine tool patents. At present, its eight products have passed the high-tech product certification in Guangdong.Jhenjet Intelligent has established a complete production an