Rpm100/100c Power Meter Multi Meter Power Quality Analyser Network Analyzer

Product DescriptionMeasurements* Measurements:VL-L, VL-N, I, In, Iz, Cos , Pf, Hz, W, ∑W, Va, ∑Va, Var, ∑Var, Kwh, Kvarh, V-THD, I-THD, 1-128th harmonic ,    system running hours,% voltage unbalance, % system load,% system leakage,frequency;Fast simultaneous sampling on all * 8 channels at 1024 samples/cycle(True RMS measurements) * For single-phase, two-phase, three-phase system * 4 voltage channel input, voltage direct connection up to 690VLL or through PT for MV and HV systems. * 5 current input: 0.05-5.5A * 4th current channel dedicated for neutral current measurements, the current measuring range (CT primary and secondary )    can be programmed together with the main three-phase channels * 5th current channel reserved for Earth Leackage monitoring (ZCT input) according to IEC60755 & IEC61140 * Suitable for 45-65Hz systems * All measured voltage characteristics certified according to IEC/EN61000-4-30:2015 Ed.3, Class A * 4 quadrants energy measurement , 4 tariffe energy measurement and  monthly energy calculation * Transients detection >25us, Detection of events >10ms * Voltage flicker measurement, and waveform capture * Maximum, minimum and demand for U, I, P, Q, S in hours, days, months * Phase diagram for voltage, current Detects CT wiring errors Data storage & recordings* Voltage and current sag/swell and transient event capture * Waveform acquisition and capture of voltage and current * Automatic fault analysis and report: Phase sequence, Phase fault, Voltage over, Voltage under, Sag/swell, Frequency over,    Current over, Short circuit, Leakage,Voltage harmonic, Current harmonic(according to IEC62606: 2013) * Alarm event log: VL-L, VL-N, I, In, ΣW, ΣVar, THD-U, THD-I... * Monthly electricity statistics * Built in 256M flash memory &32MB RAM for event and transient memory * Micro SD(support 32GB) for fault logger and data logger * Data recorded in standard excel file formats for further EN50160 analysisClock & language* Real time clock with integrated backup rechargeable battery * English, Chinese (traditional & simplied) or otherCommunication* RS485 port of Modbus RTU * Ethernet port of Modbus TCP/IP+web serverFunction module (only one can be selected)* 7 digital input+2 analog output (4-20mA) for V1, V2, V3, V12, V23, V31, I1, I2, I3 * Ethernet (Modbus TCP), web server+2 digital input+2 relay output (remote or alarm) * LoRa wireless (Private protocol)+2 digital input+2 relay output (remote or alarm) * RS-485 interface (Modbus RTU)+2 digital input+2 relay output (remote or alarm) * WIFI wireless+2 digital input+2 relay output (remote or alarm) Product ParametersAuxiliary SupplyOperating voltage (Un)85···265 VAC 50/60Hz 10W / 100-285VDC/24-48VDC(depend on order)Power consumption10VA maxMeasurement inputVoltage inputs for direct connection:Phase-neutral(L-N): max 400V RMS CAT IIIInput impedance(for direct voltage inputs):>4MΩCT inputs:max 5.5A RMSCT inputs overload capacity:max 10ACT inputs Self-consumption :