Precast Concrete Lifting Anchor Rubber Recesses Former

Rubber Recess FormerGME Rubber Recess Former can be used multiple times.The load mark on the former is easy for the identification of the load group.Different colors also can be provided.A permanent thread stud with one wing nut to tighten against the form to hold the former securely.CodeLoad GroupLoad RangeTonsTonsGME 1201 -1.31.31.3GME1201-2.52.52.5GME1201 - 5.054.0-5.0GME1201-7.57.57.5GME 1201-10.01010GME 1201-15.01515GME 1201 - 202020GME 1201 - 323232 Double Head Rubber Recess FormerGME Double Head Rubber Recess Former is used for covering and protecting the Double head lifting anchor from concrete during casting.CodeLoad GroupLoad RangeTonsTonsGME1202 -1.31.31.3GME1202 -2.52.52.5GME 1202 - 5.054.0-5.0  Magnetic Recess Former with Rubber GrommetGME Magnetic Rubber Former is used on the steel mold and suitable for all kinds of lifting pin anchors from 1.3t to 5t.The corresponding rubber grommet is available.Item No:OD /mmHeight /mmMagnetic    Force/KGsAnchor    CapacityMOQ/PCsGME-1.3T6032.8601.3T100GME-2.5T7441.5752.5T100GME-5.0T94551005.0T50GME-1.3T-Short6528601.3T100GME-2.5T-Short7933.5752.5T100GME-5.0T-Short100431005.0T50 Easy Lift Recess FormerGME Easy Lift Anchor Former is used for both Utility easy lift anchor and Easy Lift Foot Anchor. It's reusable.CodeSizeColorGME 1204-12V12VBlueGME 1204-17V17VBlack Rubber/Plastic Recess Former and FittingMaterial: Rubber/Plastic Former and Steel Fittings.Application: For various anchorsCodeLoad GroupLoad RangeTonsTonsGME2201-1.251.251.25GME2201-2.52.51.4-2.5GME2201-5.053.0-5.0GME2201-10.0106.0-10.0GME2201-262612.5-26 Magnetic Former Solid Steel Material: Powerful Neodymium Magnets, Steel PartsSurface Treatment: Zinc Plated for corrosion or made with RubberMax Working Temperature: 80ºC or as per needsDescription:The Steel Magnetic Recess Former is used for fixing lifting anchors in steel precast concrete, supported by high powerful permanence magnets.They are suitable in Capstan lifting anchors from 1.3t to 10.0t and even 20.0t or 30.0t for customers' requirements.The corresponding rubber grommet is available. Steel Magnetic Recess Former FeaturesThe good and fastest way to fix and position lifting pin anchor and build recess on the steel formwork quickly and precisely.The magnetic recess former did not need a mold hole to arrange former stud like rubber recess former.It can extend steel formwork life and non-damage.The magnetic recess former needs a rubber seal to prevent concrete into recess. The lifting pin anchor with a double head did not need the rubber seal.All magnetic formers are color zinc plated for corrosion resistance or made with rubber coating. So that it can reusable for more than 3000 times.adapt DOG BONE lifting anchor of ALP, DAYTON, DEHA, & MORE.Part No.R(mm)Force(kg)TO FIT ANCHOR   SIZEGME-1.330501.3tGME-2.5371002.5tGME-5.0471205.0tGME-10.05919010.0t Magnetic Recesses for Quik Lift StyleThe Quik Lift Magnetic Recess Member for Flat Anchors is designed with powerful magnetic circuits built-in for quick and efficient mounting/holding of recess members to steel forms. Magnetic Recess Members are available in 2, 4, and 8 ton sizes.Part No.DescriptionForce(kg)TO FIT Plate SIZEGME2201-Quik-2Magnetic Recess   Members 2 Ton Quik Lift---2tGME2201-Quik-4Magnetic Recess   Members 4 Ton Quik Lift---4tGME2201-Quik-8Magnetic Recess   Members 8 Ton Quik Lift---8t Magnetic Recesses for Fleet StyleThe Fleet Magnetic Recess Member for Flat Anchors is designed with powerful magnetic circuits built-in for quick and efficient mounting/holding of recess members to steel forms. Magnetic Recess Members are available in 2, 4, and 8-ton sizesPart No.DescriptionForce(kg)TO FIT Plate SIZEGME2201-Fleet-2Magnetic Recess   Members 2 Ton Fleet---2tGME2201-Fleet-4Magnetic Recess   Members 4 Ton Fleet---4tGME2201-Fleet-8Magnetic Recess   Members 8 Ton Fleet---8t Magnetic Recesses for Burke StyleThe Burke Magnetic Recess Member for Flat Anchors is designed with powerful magnetic circuits built-in for quick and efficient mounting/holding of recess members to steel forms. Magnetic Recess Members are available in 2, 4, and 8-ton sizes.  Part No.DescriptionForce(kg)TO FIT Plate SIZEGME2201-Burke-2Magnetic Recess   Members 2 Ton Burke---2tGME2201-Burke-4Magnetic Recess   Members 4 Ton Burke---4tGME2201-Burke-8Magnetic Recess   Members 8 Ton Burke---8t   /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1