Cn80 Pneumatic Power Wire Collated Coil Nailer

  Tool Specification:MODELCN80 (Aluminum body/Magnesium body)FIRING METHODContact tripFIRING MODE:Bump fireWEIGHT:3.98kgs (Aluminum body) 3.68kgs (Magnesium body)DIMENSIONS:362 x 132 x 307mmOPERATING PRESSURE:5-8.3kgs/cm2 (70-120psi )Customized Customized is available if you provide a drawing or sampleOEM ServiceAvailable    Nail Specification:15° Flat wire welded coil nailsLENGTH:50mm - 83 mmSHANK DIAMETER:2.5 - 3.3 mmHEAD:6.0-8.0mmSHANK TYPE:Smooth, ring & screw    Applications:Assembly and repair of pallets,drums,export wooden boxes.CratingWooden FencingGeneral construction applications including:siding,decking and sheathing  Features:   Ergonomic design, well balanced   Extra heavy-duty, die cast aluminum construction   Big load capacity   Powerful, rapid nailing performance   Comfortable rubber grip   Light weight  Service and Repars:No.  SymptomProblemsSolutions1.1Air Leak Air leak in the cylinder cap when tools don't work 1.Loose head valve piston seal or o-rings .Check and replace the head valve piston set2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap Check and replace o-ring or cylinder cap gasket under the cylinder cap1.2Air leak in Trigger area  when tools don't work1.Damaged o-ring in trigger valve Check and replace  o-ring2.Damaged o-ring in trigger valve stem Check and replace o-ring3.Dirt in the trigger valveCheck and clean the trigger valve1.3Air leak in cylinder cap when tools are working 1.Damaged head valve piston o-ringsCheck and replace  o-rings2.Damaged seal under cylinder cap Check and replace seal1.4Air leak in nose when tools are working 1.Worn or damaged bumperCheck and replace bumper2.Loose driver(piston unit) threadCheck and replace driver(piston unit) 1.5Air leak in Trigger area when tools are working1.Worn or damaged trigger valve headCheck and replace trigger valve head2.Damaged head valve piston o-ringsCheck and replace head valve piston o-rings2Failed to get driver(piston unit) back to the correct position completely.1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.Straighten the driver(piston unit)  or verify driver guide(nose) and magazine  2.Worn or damaged nozzle  Check and replace nozzle 3.The space between piston o-ring and  cylinder is too tight.Check if the cylinder is adequate lubrication or replace the o-ring on the piston.3Work weakly and sluggishly1. Worn or damaged  piston o-ring Check and replace piston o-ring 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings  Place 2 or 6 drops of oil on o-rings or replace  head valve piston o-rings3.Dirt in the nozzleCheck and clean the nozzle4Tool jams frequently1.Damaged or Worn driver (piston unit)Check and replace driver (piston unit)2.Damaged or Worn driver guide (nose)Check and replace  driver guide (nose)3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too bigCheck and replace driver guide cover 5Nail can not be shot1. Driver (piston unit) can't return to the correct position.Refer to no. 1  Symptom2.Driver guide(nose) can not match magazine wellCheck and correct the position between driver guide(nose) and magazine 3.Worn or damaged nail pusher compression spring   FAQ:1.Q:Do you have your own production factory?   A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China2.Q: Can you send us samples?   A: We are pleased to send you the sample to test the quality and market. 3.Q: About your products, could you do it OEM?   A: Yes, OEM service is available. 4.Q: Do you also provide spare parts of pneumatic tools?     A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts. 5.Q: For the product, could you spray other color of painting?    A: Yes, color can be customized. 6.Q: What's the delivery time?    A: It usually takes about 20-30 working days to produce one order. 7.Q: How is the payment terms?    A: Normally T/T 30% in advance and T/T 70% before shipment. 8.Q: Can I mix different models in one container?    A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.   9.Q: How does your factory do regarding quality control?      A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery. 10.Q: Do you have quality certification?      A: Yes, we have CE, SGS,ISO, ect.                                               About Us:Contact Us:     /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1