Junbond Jb7132 Super Seal Acetic Glass Sealant

Junbond adhesive to fish glass aquarium silicone sealant water tank quick dry silicone sealantProduct Feature:1. Single component, acidic room temperature cure.2. Excellent adhesion to glass and most building materials.3. Cured silicone rubber elastomer with excellent long-term performance in the temperature range of -50° C to +100° C.Main Application:1. Caulking and sealing for interior and exterior decoration projects2. Bonding and sealing of large floor-to-ceiling glass assemblies3. Bonding and sealing of high-block glass cabinets and glass crafts4. Large plate glass, small fish tanks less than 50cm in height, bonding and sealing of light roof craft glass structures5. Other uses tested and applicableHow to use:1. Before construction, a test of the adhesion of the sealant to the substrate should be carried out to confirm the suitabilityof the product.2. The substrate should be thoroughly cleaned with solvent or suitable cleaning agent, kept dry and glued within 30 minutesafter cleaning.3. When gluing, ensure that the gap is completely filled, so that the gluing layer is dense and in close contact with thesurface of the substrate, and the gluing gap should be repaired within 5 minutes after gluing.4. Suitable application temperature range 5°C to 40°C.Warnings:1. Use in a well-ventilated environment.2. Use solvents in accordance with the appropriate safety regulations.3. Keep the product out of the reach of children.4. If uncured sealant melts your eyes, wash them immediately with water or seek medical attention.Executive Standard: GB/T14683-2017NoTest ItemUnitActual results 1 Appearance - Smooth, no air bubbles, no lumps 2 Tack free time(at what % humidity) min 4 3 Slump Vertical mm 0 Horizontal mm Not deformed 4 Extrusion ml/min 1538 5 Shore A hardness /72h - 26 6 Shrinkage % / 7 Effect of heat aging on -     - Weight loss % 13.0%   - Cracking - No   - Chalking - No 8 Tensile adhesion Mpa     - Standard condition   0.53   - Immersion in water   /   - Dry at 100°C / 9 Elongation at break   % 112 10 Specific gravity g/cm3 1 11 Completely dry hours 16 12 Temperature Resistence °C -50ºC~150ºC 13 Application Temperature °C 4ºC~40ºC 14 Color   Transparent /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1