Viscoelastic Tape Visco Elastic Anticorrosion Tape for The Pipe Anticorrosion

 Viscoelastic Tape Visco Elastic Anticorrosion Tape For the Pipe Anticorrosion   The viscoelastic tpae visco elastic tape coating system is designed for corrosion protection of offshore pipeline,flanges,valves etc, it consists of visco-elastic tape, visco-elastic paste. Visco-Elastic TapeThe viscoelastic tape is a non cure, cold applied corrosion prevention wrap adhering extremely well to the plant coating PE, PP, FBE and irregular equipment such as flanges, valves, pipe fittings, rings, manhole etcViscoelastic tape can cold flow into all irregularities of the substrate and self healing of the complete coating system. Visco-Elastic PasteVisco elastic paste is a cold flow ,self healing elastic paste for corrosion preventing and adhering extremely well to steel and factory applied pipeline coatings like PE,PP and FBE.Visco-elastic paste can flow into all irregularities of the substrate at operating temperature. The compound does not cure and resistance to water and has a very low gas and water vapour permeability. Visco-elastic coating system requires mechanical protective layer like outwrap .This improve impact and indentation resistance of the coating system and supports the self healing ability of small damages like dent and cuts. Product  Features  Primer free.  Constant film thickness  Conforms to irregular shapes  Inert to ageing and weathering  It can be self repair for light defects  Resistance to low temperatures without getting brittle  100% coverage rate, it is completely waterproof and anti corrosion.  Environmentally friendly ,no health and safety hazard to humans  Resistant to many chemicals like water ,salts ,acids .alkalis ,polar solvents etc Product  Properties ItemTest methodPerformanceColor greenThicknessASTM D1000≥1.8mmPeel Strength to steel(23ºC)ASTM D1000≥5N/cmCoverage Rate ≥95%Peel Strength to PE(23ºC)ASTM D1000≥5N/cmCoverage Rate ≥95%Peel Strength to Steel(-45ºC)ASTM D1000≥5N/cmCoverage Rate ≥95%Shear Strength to Steel(23ºC)EN 12068≥0.02MPaCoverage Rate ≥95%Shear Strength to Steel(-45ºC)EN 12068≥0.02MPaCoverage Rate ≥95%Specific Insulation ResistanceEN 12068≥108 Ω.m2Dielectric strengthDIN 53481≥10kv/mmWater AbsorptionASTM D 570