OEM 5V 12V 24V 36V 48V Switching Power Supply 1A 2A 5A 10A 20A 30A for LED Strip Light

OEM 5V 12V 24V 36V 48V Switching Power Supply 1A 2A 5A 10A 20A 30A           For Led Strip LightFeatures 1.High Efficiency and good price2.Built-in EMI filter3.100% full load burn-in test4.Low output ripple and noise5.Protection:Over load/Over voltage/Short circuit6.LIFETIME WARRANTYModel  SpecificationS-350-5S-350-7.5S-350-12S-350-15S-350-24S-350-27S-350-48DC output voltage5V7.5V12V15V24V27V48VOutput voltage error ±2%±2%±1%±1%±1%±1%±1%Rated output current50A40A29A23.2A14.6A13A7.3AOutput current range0-50A0-40A0-29A0-23.2A0-14.6A0-13A0-7.3AWave and noise50mVp-p150mVp-p150mV150mV150mV200mV240mVInlet stability±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%Load stability±1%±1%±0.5%±0.5%±0.5%±0.5%±0.5%DC output power250W300W348W348W350.4W351W350.4WEfficiency78%79%83%83%84%85%86%Adjustable range for DC voltage4.5-5.6V6-9V10-13.2V13.5-18V20-26.4V26-32V41-56VAC input voltage range90~132VAC/180~264VAC BY SWITCH 47~63Hz;248~370VDCInput current6.5A/115V 4A/230VAC impulse current25A/115V 50A/230VLeakage current=65°C FAN ON=80°CCut off output(5~15V)RTH3>=70°C FAN ON=85°CCut off output(24~48V)Temperature coefficient±0.03%°C(0~50°C)Setup rise hold up time200ms,50ms,20msVibration10~500Hz,2G 10min./1cycle,Period for 60min,EACH AXESWithstand voltageInput and output interval,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVACIsolation resistanceInput and output interval,Input and enclosure,Output and enclosure,500VAC/100M OhmsWorking temperature and humidity-10°C~+50°C,20~90%RHStore temperature and humidity-20°C~+85°C,10~95%RHOverall dimension215*115*50mmWeight0.95Kgs /17pcs per cartonSafety standardsDesign refer to UL1012, EN60950-1,EN61347-1,EN-61347-2 approvedEMC standardsEN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approvedNote,1.The testing condition for the parameter above is,230VAC input, rated load,25°C 70%Rh,Humidity2.Error,include the setting error, line stability and load stability.(Note,5)3.Wave test,adopting"A12"double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting4.Inlet voltage stability test, when is over load, the lowest voltage of inlet is representative to the highest voltage.5.Load stability test: The load is from 0% to 100%,others 60%.6.C2,3,11must be knocked down.