FDD LTE 800MHz 20W RF PA Module with Lna

FDD-LTE 800MHz 20W-PA Module with LNATXTechnical ParametersFrequency range (MHz)791-821MHz Band Width (MHz)30MHzOutput Power@(25ºC)43±1dBmGain 50±1dBGain Adjustable rang≥20dBStep of Gain Adjustable≤1dBError of Gain AdjustableTotal error ≤ ±1.5dB  ACPR≤-40dBcIn Band Ripple≤1.5dBVSWR≤1.5Out of Band Spurious9kHz~1GHz:≤-36dBm/30kHz1GHz~12.75GHz:≤30dBm/30KHzEVM≤3%RXTechnical ParametersFrequency range (MHz)832-862MHzGain 25±2dBGain Adjustable rang≥20dBStep of Gain Adjustable≤1dBError of Gain AdjustableTotal error ≤ ±1.5dB  In Band Ripple≤1.5dBNoise figure≤1.8dBVSWR≤1.5Max. Input (no damage)0dBmOTHER SPECSTechnical ParametersPower Supply+28V; ≤3.5AStorage Temperature -25~+65ºCHumidity5%~95%Operating Temperature-25~+55ºCPOWER-6 Port for Power Supply & Monitor:PIN 1 -------- RS485A; PIN 2 -------- RS485B;PIN 3,4 -------- GND  PIN 5 -------- NC; PIN 6 -------- DC+28V. RF Connectors:  1 Connector of SMA-50KFD for PA OUT Port5 Connectors of MCX for PA IN & LNA OUT&LNA IN  Monitoring for downlink PA and uplink LNA with Baud rate9600.LNA Monitoring Part. Setup module address(default=0),  Setup LNA Enable, ATT.PA Monitoring Part . Setup module address(default=0), on/off, ATT, ALC. Query function: Working status(Overpower, Overtemperature, VSWR, ATT), Alarm (over Temperature, over power, VSWR, PA Fault);Over Temperature Alarm:Alarm threshold +85ºC, meanwhile switch off PA, When   Temperature lower to +65ºC, switch on PA automatically.Over power alarm: when output power >Po+2dBPA Revers Power detection: Detect total power, Modulated signal test detection rang >20dBm, Detection accuracy