Zl26 CB26 Brazed Plate Heat Exchanger Bphe Pump Evaporator Condenser Marine

Product DimensionModelA(mm)B(mm)C(mm)D(mm)Thickness (mm)Weight (Kg)Stagnant Fluid Volume (L)Design Pressure (Mpa)Max Fluid (L)ZL261115025031010+2.36N1.3+0.12N0.025(N-2)3/4.518m3/hApplicationRefrigeration Systems:Evaporator,Condenser,Economizers and DesuperheatersAir dryerHeat pumpAbsorption chillerHVACRadiant Floor,Snow Melt,Boiler andSolar water heat exchangerDistrict heatingOther Industrial applications such as:Heat Recovery andOil Cooler: Hydraulic oil cooling, engine oil cooling, and fuel oil heating.Steam Heating.Flat plate heat exchangerBeer wort coolerMilk pasteurizationWind turbine oil coolerMarine oil coolerYOJO Heat Exchanger Advantage:High EfficiencyThe embossed pattern of the YOJO's special heat transfer plates promotes high turbulence at low fluid velocities. The high turbulence results in very high heat transfer coefficients.Compact SizeYOJO's brazed heat exchanger can be anywhere from 50% to 80% smaller than other types of heat exchangers. It requires less floor space due to the high thermal efficiency of the stainless steel. The plates are brazed together at high temperatures, allowing the heat exchanger to be compact, leak tight, and rugged.Close Approach TemperaturesClose-approach temperatures of 1-2°F (0.5-1.0°C) are possible because of true counter flow and high heat transfer efficiency of the plates. This is an important factor in regeneration and heat recovery processes.High Temperature and Pressure RatingsYOJO's Brazed Plate Heat Exchanger maximum working pressures from 300 psi to 650 psi, and temperature ratings of 350°F.YOJO BPHE ProductYOJO Factory Show