UL CE Certificated Copper Brazed Plate Heat Exchanger for Condenser Evaporator Cooler HVAC Chiller Boiler Heat Pump

Product DescriptionModelB (mm)C (mm)D (mm)E (mm)ZL200B321188738603 Thickness (mm)13+2.7NWeight (kg)13+0.73NStagnant Fluid Volume (L)0.22(N-2)Max Pressure (Mpa)1.5/2.1/3Max Flow (L)100m 3 /hDesign Temperature-196 ° C~225 ° C Plate MaterialAISI316L/304Connection MaterialAISI304Brazing materialNickel, Copper, Fusion-bondedApplicationsCondenser, Evaporator, etc. Detailed Photos Certifications                                 Packaging & ShippingCompany Profile  Types Model A (mm)B(mm)C(mm)D(mm)thickness(mm)weight(mm)Stagnant fluid volume (L)Design pressure(Mpa)Max fluid(L)ZL1476421722069+2.3N0.6+0.056N0.010(N-2)1/3/4.58m3/hZL1895501652109+3.1N0.3+0.06N0.010(N-2)18m3/hZL20B78422823189+2.3N0.9+0.088N0.018(N-2)3/4.58m3/hZL261115025031010+2.36N1.3+0.12N0.025(N-2)3/4.518m3/hZL301247025030413+2.4N2.2+0.146N0.032(N-2)3/4.518m3/hZL52A1115046652510+2.35N1.9+0.215N0.047(N-2)3/4.518m3/hZL52B1115046652510+2.35N1.9+0.213N0.047(N-2)3/4.518m3/hZL62B1196347052610+2.35N2.4+0.223N0.051(N-2)3/4.518m3/hZL95A1919251961611+2.76N6+0.415N0.125(N-2)3/4.542m3/hZL95B1919251961611+2.76N6+0.413N0.125(N-2)3/4.542m3/hZL120A24617445652813+2.36N7+0.472N0.98(N-2)3/4.542m3/hZL120B24617445652813+2.36N7+0.472N0.98 (N-2)3/4.542m3/hZL200A3211886037389+1.58N13+0.74N0.22(N-2)1.5/2.1/3100m3/hZL200B32118860373813+2.7N13+0.73N0.22(N-2)1.5/2.1/3100m3/hOur ZL20, ZL62 series, ZL130, ZL250 are specifically developed for R410A refrigerant, which is ideal alternative of R22. R410A efficient heat exchanger is not only resistant to high pressure, but also with less refrigerant to achieve the same cooling effect. ZL20 and ZL62 are unilateral flow. ZL130 and ZL250 are diagonal flow. They can work from the power range of 1KW to 250KW.ModelA(mm)B(mm)C(mm)D(mm)Thickness(mm)Weight(mm)Stagnant fluid volume (L)Design pressure(Mpa)Max fluid(L)ZL20A86402693159+1.58N1+0.084N0.018(N-2)3/4.58m3/hZL62A1196347052610+2.35N2.4+0.225N0.051(N-2)3/4.518m3/hModelA(mm)B(mm)C(mm)D(mm)E(mm)F(mm)Thickness(mm)Weight(mm)Stagnant fluid volume (L)Design pressure(Mpa)Max fluid(L)ZL13024716149541436917210+2.15N4+0.424N0.080(N-2)3/4.542m3/hZL250322205.2739631.7568224.413+2.7N16+0.711N0.22(N-2)3/4.5100m3/hApplicationHVACRefrigeration industry- Chiller, Heat pumpRefrigeration systemsEvaporator /CondenserEconomizersDesuperheaterEconomizerChillerBoilerAir dryerHeat pumpSubcoolerOil coolerHeat recoveryRadiant floorIntermediate heat transfer for the absorption cycleSolar systemSnow-meltingRadiant floor heatingWall-hung boilerIndustrial / Drinking water treatmentOther Industrial applications such as:Heat Recovery andOil Cooler: Hydraulic oil cooling, engine oil cooling, and fuel oil heating.Steam Heating.Flat plate heat exchangerBeer wort coolerMilk pasteurizationWind turbine oil coolerMarine oil coolerAmmoniaOur AdvantagesHigh EfficiencyThe embossed pattern of the YOJO's special heat transfer plates promotes high turbulence at low fluid velocities. The high turbulence results in very high heat transfer coefficients.Compact SizeYOJO's brazed heat exchanger can be anywhere from 50% to 80% smaller than other types of heat exchangers. It requires less floor space due to the high thermal efficiency of the stainless steel. The plates are brazed together at high temperatures, allowing the heat exchanger to be compact, leak tight, and rugged.Close Approach TemperaturesClose-approach temperatures of 1-2°F (0.5-1.0°C) are possible because of true counter flow and high heat transfer efficiency of the plates. This is an important factor in regeneration and heat recovery processes.High Temperature and Pressure RatingsYOJO's Brazed Plate Heat Exchanger maximum working pressures from 300 psi to 650 psi, and temperature ratings of 350°F.