Trolley Car Bottom Type Aluminium Wire Al Wire Annealing Furnace Hot Air Circulation Furnace Oven

Aluminium Wire Annealing Furnace Aluminum Alloy Aging Furnace  Product Description I. Work flow:The loading bracket is loaded with aluminium wire bobbins and then conveyed to the trolley by forklift. Furnace door is electrically lifted up, the trolley conveys aluminim wire bobbins into heating furnace, furnace door is then electrically lifted down and locked tightly. The hot air circulation fan is started and run according to preset process curve automatically, completing the heating and heat holding process. After the heat holding process finishes, the heating power is turned off. The furnace door is lifted up and aluminium wires would be cooled inside furnace. After about 2- 3 hours, the circulation fan is closed, and the feeding and unloading mechanism pulls aluminium wires out. Then it begins the next shift of annealing. With this process, it's able to work 3 shifts (8 hours one shift) per day. Product Parameters II.  Supply ScopeNo.Components NameQuantity1Furnace body1 set2Trolley and trolley driving mechanism1 set3Bobbin loading bracket1 set (4 pieces)4Hot air circulation fan with air guiding system2 sets5Furnace door lifting and sealing mechanism1 set6.Temperature control system (2 Zones)1set Document 7General drawing of aluminum wire annealing furnace1copy8Foundation drawing1copy9Furnace external wiring diagram1copy 10Electrical principle chart1copy11Operating manual1copy12Qualification1copyDetailed Photos III. Our Workshop:IV. Loading&Shipment: Company Profile