16000bph Automatic Pet Plastic Bottle Blow Molding / Blowing Moulding Machine for Making 250ml 500ml 1L 2L 5L Water Beverage Juice Oil Bottles Jar Factory Price

Product DescriptionAutomatic PET PETG Plastic Bottle Blow Molding / blowing Moulding Machine for making 200ml 250ml 300ml 350ml 400ml 450ml 500ml 520ml 550ml 600ml 750ml 800ml 900ml 1000ml 1l 1.5l 2l 2.5l 5l 10l clear Water Beverage Juice Bottles jar drum can Faygo's Fully automatic Blow Molding Machine mainly used to making PET& PETG plastic bottles/cups/buckets which for filling pure water, mineral water, milk, juice,beverage liquid,oil,etc. It is developed totally independently, has our own intellectual property rights, and has obtained more than 13 national patents.FG series are the most stable two-step high speed automatic liner blow moulding machine. FG4 serie has four cavities and the maximum capacity of the products is 2L.The capacity can be 6800-8000BPH, 8 cavities can reach 16000BPH. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET etc.YD series are the standard speed automatic flip blow molding machine,the maximum capacity of the blowing bottle is 20L.It is a very cost-effective model.The Features of this Faygo Bottle Blow molding Machine1).High Automatization2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.4).High Speed:8000BPH(4-cavity)5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.6).Low Cost:Low consumption of electricity, air and water.7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise. Product ParametersModelFG4FG6FG8RemarkMold number(piece)468 Capacity(BPH)6500~80009000~1000013000~16000    Bottle specificationMax volume(mL)20002000750Max height(mm)328328328Round bottle max diameter(mm)105105105Square bottle max diagonal(mm)115115115Preform specificationSuitable inner bottle neck(mm)20--2520--2520--25Max preform length(mm)150150150ElectricityTotal installation power(kW)515197Heating oven real power(kW)253045Voltage/frequency(V/Hz)380(50Hz)380(50Hz)380(50Hz)Compressed airPressure(bar)303030Cooling waterMold waterPressure(bar)4-64-64-6Water chiller(5HP)Temperature regulation range(°C)6--136--136--13Oven waterPressure(bar)4-64-64-6Water chiller(5HP)Temperature regulation range(°C)6-136-136-13Machine specificationMachine dimension(m)(L*W*H)3.3X1X2.34.3X1X2.34.8X1X2.3 Machine weight(Kg)320038004500 Product DetailsServo driving and cam linking blowing section: The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement.equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.Small performs distance heating system:Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30% electricity consumption.Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.Efficient and soft perform inlet system:By rotary and soft preform inlet system, the speed of prefom feeding is ensured meanwhile, the preform neck is well protecteModularized design conception:Adopting modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts.FG Series  Optional items:Exploded bottles ejection unit:During the blowing process, if the bottle burst, bad bottles can be automatically removed.This prevents the bad bottles from entering the filling machine.HP air recovery system:After the bottle blowing, high-pressure air can be recycled and used again for the pre-blowing and machine physical movement. Oven and preform temperature detection system:Detection system detects temperature of oven and the temperature of performs.When the preform temperature does not reach the set blowing temperature, blowing workstation will alarm, not blown. Equipped with remote monitoring system:Engineers in China headquarter can check the data collected and sent by the PLC anytime with the mobile ,feedback will informed to  the client's site if something abnormal ,give the machine 24 hour'baby care in the cradle.Related Products Company ProfileJiangsu Faygo Union Machinery is a professional manufacturer of plastic machines.It occupied an area of 18000 square meters. With years of development, its products covers plastic extrusion lines,plastic blowing machine, plastic recycling machine, air compressor etc. Stick to the company idea is making good machine, being good person,Faygo Plast alwasy provide customers with high quality machines.Warmly welcome to visit our factory (next to Shanghai)!FAYGO UNION GROUP has 3 branch factories.1.FAYGOBLOW which design and make blow molding machine for PET, PE etc. FAYGOBLOW has 5 patents of invention, and 8 patents utility models. FAYG